Trim

Trim Tab

Türkçe: Trim (dengeleme yüzeyi)

KISACA

Trim, kumanda yüzeyinin (genellikle irtifa dümeni) istenen konumda kalması için gereken kumanda kuvvetini sıfırlayan küçük ayar yüzeyidir.

Trim nedir?

Pilot önce uçağı istediği duruma ve hıza getirir, sonra trimle lövyedeki kuvveti alır. Doğru trimlenmiş uçak, pilot kumandayı bıraksa bile aynı hız ve durumda kalmaya çalışır. Trim tab, kumanda yüzeyinin ters yönüne hareket eder: irtifa dümenini aşağı tutmak için trim tab yukarı kalkar.

"Önce durum, sonra trim" kuralı: trimle uçak uçurulmaz, trim yalnızca kuvveti alır.

KENDİNİ DENE

Trimin görevi nedir?

ATPL sınavında bu konu nasıl sorulur? 3 soru

Sorular sınavdaki gibi İngilizcedir. Cevabını düşün, sonra aç.

1. Why is a double switch installed on the elevator trim control?

  1. to prevent both pilots from performing opposite trim inputs.
  2. to reduce the probability of a trim runaway.
  3. to be able to use two different trim speeds, slow trim rate at high speed and high trim rate at low speed.
  4. because there are two trim motors.
Cevabı göster

Doğru cevap: to reduce the probability of a trim runaway.

A double switch (or dual-channel switch) reduces the risk of a trim runaway accident by requiring independent activation paths, so a single switch failure cannot cause uncontrolled trim movement.

2. Can large transport aeroplanes trim the aileron and rudder without mechanical trim tabs?

  1. No, because without trim tabs trimming is not possible.
  2. Yes, but trimming is only possible when the autopilot is engaged.
  3. Yes, trimming is possible by adjusting the neutral point of the artificial feel mechanism by means of a trim switch.
  4. Yes, trimming is achieved by automatically adjusting control surface deflection limits through the flight control computer during level flight.
Cevabı göster

Doğru cevap: Yes, trimming is possible by adjusting the neutral point of the artificial feel mechanism by means of a trim switch.

Yes, modern aircraft use an artificial feel system with electronic trim switches that adjust the neutral point of the control forces, eliminating the need for physical trim tabs on these surfaces.

3. At high Mach numbers, the Mach trim system:

  1. interlocks the operation of the stick shaker at the oncoming of the high speed stall.
  2. trims the pitch-down tendency at a high Mach number by changing the horizontal stabilizer.
  3. searches for the ideal C.G. location by transferring the fuel into the horizontal stabilizer.
  4. trims the pitch-up tendency at a high Mach number.
Cevabı göster

Doğru cevap: trims the pitch-down tendency at a high Mach number by changing the horizontal stabilizer.

As speed increases, aerodynamic forces cause a pitch-down tendency; the Mach trim automatically adjusts the horizontal stabilizer to counteract this effect.

Bu dersten 10 soruyu ücretsiz çöz →

Trim hakkında sık sorulan sorular

Trim neden önce durum, sonra trim kuralıyla kullanılır?

Trim ile uçak uçurulmaz; önce uçak istenen duruma ve hıza getirilir, sonra trim lövyedeki kuvveti alır. Doğru trimlenmiş uçak, pilot kumandayı bıraksa bile aynı hız ve durumda kalmaya çalışır.

Trim tab kumanda yüzeyine göre nasıl hareket eder?

Trim tab, kumanda yüzeyinin ters yönüne hareket eder. Örneğin irtifa dümenini aşağı tutmak için trim tab yukarı kalkar.

Resmi Kaynaklar ve İleri Okuma

Bu yazı eğitim amaçlıdır; uçuşta güncel resmi yayınlar (AIP, NOTAM, uçağın POH/AFM'i) esas alınır.

Son güncelleme: · Hata bildirimi: [email protected]