Next ideas
Preparing.What are aviation simulations?
The simulations here let you see the most commonly confused PPL and ATPL theory topics by changing sliders instead of memorising them. In each simulation you change the inputs (such as wind, altitude, temperature and heading), and it shows the result live; below each one you will find the formula, a worked example and frequently asked questions. All are free and run in your browser.
Frequently asked questions
Are the simulations free?
Yes. All interactive aviation simulations on Son Yaklaşma are free and require no membership; they run in the browser and need no installation.
Which levels are the simulations suitable for?
The topics were selected from those most often confused in PPL and ATPL students' theory lessons: VOR navigation (CDI, HSI, OBS, TO/FROM, RMI, DME arc), ADF/NDB (RBI, QDM, homing and tracking), ILS approach (localiser, glideslope, DA decision), METAR and TAF reading trainers, VFR go/no-go decision with METAR/TAF, listening to and noting ATIS, crosswind, holding entry procedures (IR), IAS · TAS · GS and Mach speeds, landing distance, density altitude, altimeter setting and descent planning (TOD). The level of each simulation is stated on its card.
Can the simulations be used in real flight?
No. The simulations are for training purposes; values are representative. For real flight, the aircraft's official handbook (POH/AFM), AIP and current meteorological information apply; ultimate responsibility lies with the pilot.
What topics do the simulations cover?
Flying around a VOR station: CDI, HSI, TO/FROM flag and RMI reading, windy radial and DME arc tasks; around an NDB: ADF (RBI) and QDM calculation, homing and tracking; ILS approach: localiser and glideslope tracking, landing or go-around decision at DA; listening to and noting the synthetic ATIS broadcast generated from current METAR; crosswind components and wind correction angle; direct, parallel and teardrop holding entry procedures (with exam mode); conversion of IAS, TAS, GS and Mach speeds according to altitude, temperature and wind; landing distance (Ground Roll) according to weight, density altitude, wind and runway surface; pressure and density altitude from aerodrome elevation, QNH and temperature; altimeter reading and setting error with QNH, QFE and QNE settings; and TOD distance, descent speed and descent time using the 3:1 rule.
Simulations are for training purposes only; in real flight operations, official manuals, the AIP and current meteorological information take precedence.