True Airspeed Calculator: IAS, TAS, GS and Mach

The same indicated airspeed (IAS) means a different true airspeed (TAS) at every altitude and temperature. Change altitude, temperature and wind; IAS stays constant while TAS, ground speed (GS) and Mach number pull apart.

PPLATPLPerformanceBeginner
In short: What is the difference between IAS, TAS and GS?

IAS is the speed shown on the airspeed indicator; TAS is the aircraft’s real speed through the air and rises with altitude and temperature at constant IAS (about 2% per 1,000 ft). GS is TAS combined with the wind, and Mach is TAS divided by the local speed of sound.

6 500 ft
FL065
2 °C
90 KT
headwind 10 KT
Along-track component only. A full wind triangle simulator is in the works.
Preset scenarios
IAS · indicated
90KT
what the pilot reads on the dial
TAS · true
—KT
GS · ground speed
—KT
Mach
—M

Speed ladder

Same scale · top axis shows Mach

TAS versus altitude at constant IAS

Current ISA deviation is held constant
ISA deviation
—
°C · relative to the standard atmosphere
Speed of sound
—
KT · at this temperature
Density altitude
—
ft
Rule of thumb
—

How does it work?

The pitot tube measures only dynamic pressure; as the air thins the aircraft must fly faster to produce the same pressure. That is why TAS increases with altitude and temperature at constant IAS. Mach = TAS ÷ local speed of sound, and the speed of sound depends only on temperature, so the same TAS is a higher Mach in cold air.

GS = TAS − headwind (add a tailwind). The simulator treats CAS as equal to IAS (no instrument or position error) and calculates TAS with the compressible-flow equation in the ISA atmosphere.

Test yourself

FL100, OAT −5 °C, IAS 150 KT and a 20 KT tailwind: roughly what are TAS, GS and Mach? Estimate first, then check it in the calculator.

Practice ATPL questions →

This simulator is for training only. Values are representative and do not replace the aircraft’s official POH/AFM, the AIP or current weather information in real flight operations. The pilot in command is always responsible.

True Airspeed Calculator: IAS, TAS, GS and Mach: the full explanation

Published: · Updated: · By: Son Yaklaşma editorial team

IAS, CAS, TAS, GS and Mach

Why TAS increases with altitude

The pitot tube measures dynamic pressure, ½ρV². As the air thins, the aircraft has to move faster to produce the same dynamic pressure, so a constant IAS means a higher TAS. The rule of thumb is about 2% per 1,000 ft: 150 KT IAS at 10,000 ft is roughly 180 KT TAS.

TAS and Mach at 150 KT IAS in ISA

True airspeed, Mach number and speed of sound for 150 KT IAS at each pressure altitude in the standard atmosphere
Pressure altitudeISA tempTASMachSpeed of sound
0 ft15 °C150 KT0.23661 KT
5,000 ft5 °C161 KT0.25650 KT
10,000 ft−5 °C174 KT0.27638 KT
20,000 ft−25 °C204 KT0.33614 KT
30,000 ft−44 °C242 KT0.41589 KT
40,000 ft−57 °C294 KT0.51574 KT

Worked example

FL100, OAT −5 °C, IAS 150 KT and a 20 KT tailwind. TAS ≈ 174 KT, ground speed ≈ 194 KT and Mach ≈ 0.27. The 2% rule gives 150 × 1.20 = 180 KT, close to the exact value.

Why stall speed is given as IAS

The wing stalls at roughly the same dynamic pressure, which is the same IAS, whatever the altitude. That is why POH speeds such as Vs, Vref and Vy are published as indicated airspeeds, while navigation and fuel planning use TAS and GS.

How to find TAS and ground speed

  1. Read IAS and convert to CAS. Note the IAS and correct it with the POH calibration table to get CAS (the simulator assumes CAS = IAS).
  2. Find pressure altitude and OAT. Read pressure altitude with 1013.25 hPa set and note the outside air temperature.
  3. Work out the ISA deviation. ISA at that altitude is 15 °C − 1.98 °C per 1,000 ft; compare it with the OAT.
  4. Calculate TAS. Use an E6B, a flight computer or the rule of thumb: TAS ≈ IAS + 2% per 1,000 ft.
  5. Apply the wind to get GS. Subtract the headwind component from TAS, or add the tailwind component.
  6. Work out Mach if needed. At high altitude divide TAS by the speed of sound: Mach = TAS ÷ (38.97 × √T in kelvin).

Frequently asked questions

What is the difference between IAS and TAS?

IAS is read from the pitot-static system; TAS is the real speed through the air mass. They are almost equal at sea level in ISA. As the air thins with altitude or heat, the aircraft must fly faster to produce the same dynamic pressure, so TAS rises for the same IAS.

How do you calculate true airspeed?

Rule of thumb: TAS ≈ IAS × (1 + 0.02 × altitude/1000 ft). For an exact value use the density ratio, TAS = EAS ÷ √σ, or an E6B with IAS, pressure altitude and OAT.

How do you get ground speed from TAS?

Ground speed is TAS corrected for the along-track wind: GS = TAS − headwind, or TAS + tailwind. With a crosswind you solve the full wind triangle.

How does temperature affect TAS?

Warmer than ISA means lower density, higher density altitude and higher TAS for the same IAS; colder air does the opposite. Temperature also changes the speed of sound, and so the Mach number at a given TAS.

What is Mach number?

Mach number is TAS divided by the local speed of sound. The speed of sound depends only on temperature (a ≈ 38.97 × √T) and is about 661 KT at sea level in ISA.

Is stall speed IAS or TAS?

The wing stalls at about the same IAS at any altitude; as a TAS it rises with altitude. That is why stall and approach speeds in the POH are given as IAS.

Sources

More calculators