Holding Entry Procedures

An aircraft arriving at a holding fix chooses how to join the holding pattern according to its direction of arrival. Change the inbound course, the aircraft's arrival heading and the holding direction; follow the correct entry procedure (direct, parallel or teardrop) with the flight route, then test yourself in exam mode.

PPLIRATPLIntermediate level
In short: Which entry procedure is chosen?

The holding entry method is chosen according to the sector in which the aircraft's arrival track to the holding fix lies relative to the inbound course: direct entry (≈180° sector), parallel entry (110° sector) or teardrop entry (70° sector). For left-hand holds the sectors are mirror images.

Holding entry procedures (holding entry procedures) are ICAO procedures that determine how an aircraft joins the holding pattern when it reaches the holding fix. There are three basic entry procedures: direct entry (direct entry), parallel entry (parallel entry) and teardrop entry (teardrop entry).

The procedure to apply is determined by the aircraft's arrival heading relative to the holding inbound course's angle to the inbound course. In a right-hand (standard) holding pattern, the 360° around the inbound course is divided into three sectors:

  • Direct entry (sector approx. 180° wide): The aircraft crosses the fix, turns directly to the holding side and enters the outbound leg. This is the most commonly used entry procedure.
  • Parallel entry (110° sector, the side where the holding pattern is): The aircraft crosses the fix, flies outbound for about 1 minute on the reciprocal of the inbound course, then turns towards the holding side to intercept the inbound track.
  • Teardrop entry (70° sector, the opposite side): The aircraft crosses the fix, flies for about 1 minute on a heading diverging 30° towards the holding side, then turns back onto the inbound track. It takes its name from the teardrop shape of the flight path.

Left-turn (non-standard, left-hand) In holding, the sectors are exact mirror images: the parallel sector is on the right and the teardrop sector on the left. Unless ATC specifies otherwise, standard holding is right-hand turns.

Source: ICAO Doc 8168 (PANS-OPS). Holding procedures are a topic that appears in PPL, IR and ATPL theory exams and is also frequently used in practical flying. The simulation below visualises the sectors and the entry track live.

360°
180°
045°
Holding direction
Mode
Correct entry
Direct
N PARALEL TEARDROP DIREKT VOR
Sectors (Standard)
Parallel · 110° width
Teardrop · 70° width
Direct · 180° width
The yellow dashed line is the 70° line. The entry type is determined by the sector from which the aircraft approaches the line. In a Non-Standard hold the sectors are mirror images.
Animate the entry

How does it work?

The entry type is determined by the direction from which the aircraft approaches the holding fix. The inbound course and the 70° line divide the surroundings into three sectors: direct (180°), parallel (110°, the side where the holding pattern is) and teardrop (70°, the opposite side). In terms of heading of arrival, for a right-hand holding pattern relative to the Inbound Course: 110°–180° teardrop, 180°–290° parallel, the rest direct. For a left-hand holding pattern the sectors are mirror images.

Test yourself

In exam mode a random direction and Inbound Course are given. Choose the entry type yourself; the correct one appears on screen with the route line.

Practice ATPL questions →

This simulator is for training only. Values are representative and do not replace the aircraft’s official POH/AFM, the AIP or current weather information in real flight operations. The pilot in command is always responsible.

Holding Entry Procedures: the full explanation

Published: · Updated: · By: Son Yaklaşma editorial team

Entry sectors summary (right-hand standard hold)

Entry procedure, sector width and relative bearing range for a right-hand standard hold
Entry procedureSector widthRelative bearing rangeHow to fly it?
Direct (direct)≈ 180°0°–110° and 290°–360°Cross the fix, then turn directly onto the holding side to enter the outbound leg.
Parallel (parallel)110°180°–290°Cross the fix, fly parallel to the inbound course on the reciprocal (outbound heading) for approximately 1 minute, then turn towards the holding side and intercept the inbound track.
Teardrop70°110°–180°Cross the fix, fly on a heading offset 30° towards the holding side for approximately 1 minute, then turn back onto the inbound track.

For a left-hand (non-standard) hold, the sectors are the mirror image of this. Unless ATC specifies otherwise, the hold is right-handed.

Worked example: which entry?

Hold: inbound course 270°, right-hand (holding side north), outbound course 090°. Relative bearing = aircraft's approach track to the fix − inbound course (if negative, add 360).

Three different approaches to a right-hand hold with inbound course 270°
Approach trackRelative bearingEntryAfter the fix
300°300 − 270 = 30°DirectTurn right and fly directly onto outbound 090°.
045°045 − 270 + 360 = 135°TeardropOffset 30° towards the holding side and fly 060° for 1 minute, turn right and intercept inbound 270°.
180°180 − 270 + 360 = 270°ParallelFly outbound 090° on the non-holding side (south) for 1 minute, turn left and return to the fix.

For a left-hand hold, use the same table by taking 360 − relative bearing instead of the relative bearing.

Holding pattern dimensions

Common mistakes

In the exam mode of the simulation above, a random heading and inbound course are given; choose the entry procedure yourself and the correct track line will be shown.

How is the holding entry procedure determined?

  1. Determine the inbound course. Find the inbound course (IC) from ATC or the procedure chart. This is your approach track to the holding fix.
  2. Calculate arrival direction. Note the aircraft's current heading. Calculate the difference between the arrival direction and the inbound course.
  3. Learn holding direction. ATC specifies whether a right-turn (standard) or left-turn (non-standard) hold is required. Standard hold is right-turn.
  4. Determine the sector. Right-turn hold: relative bearing 0°–110° and 290°–360° means direct, 180°–290° means parallel, 110°–180° means teardrop entry.
  5. Apply entry. As you approach the holding fix, apply the entry procedure you selected (direct, parallel or teardrop) and join the holding pattern.

Frequently asked questions

What are the holding entry procedures?

According to ICAO procedures there are three holding entry procedures: direct entry, parallel entry and teardrop entry. Which procedure to apply is determined by the angle between the aircraft's arrival direction to the holding fix and the inbound course.

When is direct entry applied?

In a right-hand hold, if the aircraft's arrival track relative to the inbound course lies in the 0°–110° and 290°–360° sector (about 180° in total), a direct entry is used. The aircraft crosses the fix and turns directly towards the holding side to enter the outbound leg.

When is parallel entry applied?

In a right-hand hold, if the aircraft's arrival track relative to the inbound course lies in the 180°–290° sector (110° wide, the side where the holding pattern is), a parallel entry is used. The aircraft crosses the fix, flies the reciprocal of the inbound course (outbound direction) for approximately 1 minute, then turns towards the holding side and intercepts the inbound track.

When is teardrop entry applied?

In a right-hand hold, if the aircraft's arrival track relative to the inbound course lies in the 110°–180° sector (70° wide, the opposite side of the holding pattern), a teardrop entry is used. The aircraft crosses the fix, flies for approximately 1 minute on a heading offset 30° towards the holding side, then turns to intercept the inbound track.

How do sectors change in a left-turn hold?

In a left-turn (non-standard) hold, the sectors are the mirror image of those in a right-turn hold. The parallel entry sector moves to the right side, and the teardrop sector moves to the left side.

What are inbound course and outbound course?

The inbound course (IC) is the magnetic track the aircraft follows as it approaches the holding fix. The outbound course (OC) is the exact reciprocal of the inbound course (IC + 180°); the aircraft follows this track on the outbound leg. In the holding pattern the aircraft continually alternates between the inbound and outbound legs.

How many minutes does the outbound leg last in the holding pattern?

According to ICAO PANS-OPS, the outbound leg is 1 minute at 14,000 ft and below, and 1.5 minutes above 14,000 ft. Time is measured after passing the fix on entry and on the outbound leg.

At what speed are turns made in the holding pattern?

Turns are made at standard rate (360° per minute, i.e. 3°/s) or at 25° bank angle; whichever requires the lower bank angle is used.

Sources

More calculators