Holding Pattern
A holding pattern is a predetermined manoeuvre in which an aircraft on an IFR flight, under instruction from the pilot or ATC, flies repeated circuits around a fix within a defined airspace while waiting.
What is Holding Pattern?
A holding pattern is a standard manoeuvre on IFR flights that keeps aircraft not yet ready to approach, those experiencing delay, or those waiting for suitable conditions to land, safely within a defined area. The elements that make up the pattern are a reference point (navaid, waypoint or coordinates), the inbound and outbound legs, the direction of turns (right or left), leg length (normally 1 minute or 1.5 minutes) and the altitude.
A holding pattern consists of two main legs: the inbound leg (towards the reference point) and the outbound leg (away from the reference point). The pilot receives a holding clearance from ATC and follows the pattern at the specified altitude, speed and direction. A standard holding pattern is flown with right-hand turns (clockwise); left-hand turns (anticlockwise) must be specified explicitly.
The holding pattern is a critical manoeuvre on IFR flights because it allows the pilot to remain safely within a defined area until conditions for landing are suitable, traffic clears or an approach clearance is granted. Correct holding technique ensures fuel management, altitude control and navigational accuracy.
On the radio
According to ICAO Doc 4444, what is the standard holding pattern leg length in minutes at FL140 and below?
At FL140 and below the leg length is 1 minute; above FL140 it is 1.5 minutes. This is standardised to optimise fuel consumption and altitude control in the holding pattern.
Frequently asked questions about Holding Pattern
How is a holding pattern constructed?
A holding pattern is defined by a reference point, inbound and outbound legs, direction of turns, leg length and altitude. The pilot follows the pattern at the altitude, speed and direction specified in the holding clearance issued by ATC.
How is a left-hand holding pattern specified?
The standard holding pattern is flown with right-hand turns; a left-hand turn must be specified explicitly. Correct holding technique ensures fuel management, altitude control and navigational accuracy.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 11 Nov 2026 · Report an error: [email protected]