ADF / NDB Navigation: Homing and Tracking: the full explanation
Published: · Updated: · By: Son Yaklaşma editorial team
What are ADF and NDB?
NDB (Non-Directional Beacon) is a ground station that transmits the same signal in all directions; it operates in the 190–1750 kHz (LF/MF) band and identifies itself with a two- or three-letter Morse code. The ADF (Automatic Direction Finder) receiver in the aircraft uses loop and sense antennas to find the direction the signal comes from and points to the station on the indicator. Unlike a VOR, an NDB does not transmit radials: the ADF only gives the station's direction relative to the aircraft, and the pilot calculates which magnetic track the aircraft is on. The NDB has no TO/FROM flag and does not on its own provide distance information.
The difference between RBI and RMI
On a fixed-card ADF indicator (RBI, relative bearing indicator), 0 is always at the top of the card; the needle shows the station's angle relative to the nose, i.e. the relative bearing (RB). To find the magnetic direction to the station, the heading is added: QDM = HDG + RB. On an RMI, the card is linked to the compass and rotates with the aircraft's heading; the head of the needle directly shows the QDM and the tail shows the QDR, no calculation needed.
| Term | Meaning | Relationship |
|---|---|---|
| QDM | Magnetic direction from the aircraft to the station | QDM = HDG + RB |
| QDR | Magnetic direction from the station to the aircraft | QDR = QDM ± 180 |
| RB (relative bearing) | Angle of the station relative to the aircraft's nose (clockwise) | RB = QDM − HDG |
| HDG | Magnetic heading of the aircraft | HDG = QDM − RB |
| Heading (HDG) | RB | QDM | QDR |
|---|---|---|---|
| 030 | 060 | 090 | 270 |
| 300 | 330 | 270 | 090 |
| 120 | 200 | 320 | 140 |
| 250 | 000 | 250 | 070 |
Homing and tracking
Homing means flying to the station by keeping the ADF needle permanently on the nose (RB 000). In still air it makes a straight track; in wind, the aircraft is continuously blown off track, the heading keeps changing, and it reaches the station along a curved path, arriving from the downwind side with its nose pointing into the wind. Tracking means following a specific QDM track: a wind correction angle (WCA) is added to the heading and the track is held. When tracking, the needle does not sit on the nose but rests WCA degrees to one side: if the wind is from the left, the heading is corrected to the left and the needle appears to the right of the nose.
Intercept
- Inbound: Set the heading to the desired QDM. If the needle is to the right of the nose, the route is to the right: take an intercept heading 30–45° to the right of the route. When the needle drops to the intercept angle to the left of the nose (RB 315 for a 45° intercept), you are on the route; turn the heading to the QDM. If the needle is to the left, do the opposite of everything.
- Outbound: Set the heading to the desired QDR. The route is on the side where the head of the needle is relative to the tail line (RB 180). Take a 30–45° intercept heading to that side; when the needle moves away from the tail by the intercept angle (RB 135 or 225), you are on the route.
ADF errors
- Night effect: At dusk and at night the sky wave strengthens and mixes with the ground wave; the needle oscillates.
- Mountain effect: The signal reflects off mountains; in mountainous areas the needle may point in the wrong direction.
- Coastal effect: The ground wave is refracted when passing from land to sea; the error increases when the signal crosses the coast at a shallow angle.
- Thunderstorm effect: The needle may deflect towards a nearby cumulonimbus.
- Bank error: During turns the antenna tilts, so readings are taken in straight flight.
Worked example
Heading 030, ADF needle RB 060. QDM = 030 + 060 = 090; the aircraft is on the QDR 270 radial from the station, i.e. west of the station. Task: fly to the station on QDM 090. Wind 360°/20 kt, TAS 120 kt: the wind is from the left, WCA ≈ asin(20 × sin 90° / 120) ≈ 10° left, heading ≈ 080. When on track, the needle sits 10° right of the nose (RB 010). If you bring the needle onto the nose and fly that (homing), the aircraft drifts south and reaches the station along a curved path.
Common mistakes
- Taking the RB for the QDM. On a fixed-card indicator, the number the needle points to is the angle relative to the nose, not the magnetic direction of the station; the heading must be added.
- Forgetting to subtract 360. If HDG + RB exceeds 360, subtract 360.
- Homing in wind. Keeping the needle on the nose takes you to the station but not along the intended track; approach procedures require tracking.
- Not identifying the station. A bearing read without listening to the Morse code may belong to a different station.
The default station (SY 350 kHz) is fictional; a real Turkish NDB can be selected from the list (OurAirports open data; the AIP Türkiye is authoritative for current and official information). The map is oriented to magnetic north. For training purposes only.
How to fly to an NDB on a specific QDM (tracking)?
- Set and identify the station. Enter the NDB frequency into the ADF and verify it is the correct station by listening to the Morse code.
- Find the QDM. QDM = heading + RB. If an RMI is present, read it directly from the head of the needle.
- Determine the side of the route. When you set the heading to the requested QDM, the route lies on the side of the nose towards which the needle points.
- Get intercept heading. Turn 30–45° to that side according to the route.
- Return to track. When the needle has moved to the other side by the intersection angle (for 45°, RB 315 or 045), turn the heading to QDM.
- Correct the wind. Add the wind correction angle to the heading; when on track, the needle sits that angle off the nose on the other side.
Frequently asked questions
What is the difference between ADF and RMI?
A fixed-card ADF indicator (RBI) shows the bearing of the station relative to the nose (RB); add heading to get a magnetic bearing to the station (QDM = HDG + RB). On the RMI, the card rotates with heading and the needle points directly to the QDM.
How is QDM calculated?
QDM = heading + relative bearing. If the result exceeds 360, subtract 360. For example, if heading is 300 and RB is 330, QDM = 630 − 360 = 270; QDR is the reciprocal, 090.
What is the difference between homing and tracking?
Homing means flying to the station while keeping the ADF needle on the nose; in wind it traces a curved path. Tracking means following a specific QDM line with wind correction; the needle sits off the nose by the correction angle.
On which frequencies does the NDB transmit?
NDBs transmit in the 190–1750 kHz (LF/MF) band and are identified by a two or three-letter Morse code. As the low-frequency signal follows the terrain, it can be received at low altitude, but it is prone to errors such as night effect and mountain effect.
Does the NDB have DME and TO/FROM?
An NDB does not transmit radials and does not provide distance on its own, so there is no TO/FROM flag. Some NDBs are installed together with a DME; for distance, use the DME or a time-speed calculation.
What are ADF errors?
The main ones are night effect, mountain effect, coastal effect, thunderstorm effect and banking error. For this reason, the ADF reading is taken in level flight and the station is always identified by its Morse code.
Are my results being saved?
The simulator is open to everyone. To see "Where am I?" tour scores and mission stars, it is enough to sign up for free and log in.
Sources
- FAA, Pilot's Handbook of Aeronautical Knowledge, Chapter 16: Navigation
- FAA, Aeronautical Information Manual, Chapter 1 Section 1: Navigation Aids
- ICAO Annex 10, Aeronautical Telecommunications, Volume I: Radio Navigation Aids
- OurAirports open data (navaids)