ADF

Automatic Direction Finder

PPLATPLIR Radio Navigation
IN SHORT

The ADF is an aircraft receiver that picks up the NDB signal and shows the bearing of the station relative to the nose of the aircraft (relative bearing, RB).

What is ADF?

The ADF (Automatic Direction Finder) is a navigation instrument fitted in the aircraft that uses signals from ground-based NDB (Non-Directional Beacon) radio beacons to show the relative direction of the station.

On a fixed-card ADF indicator (RBI), 0 always represents the nose; the needle shows the relative bearing of the station from the nose.

The magnetic bearing to the station, QDM, is the magnetic heading plus the relative bearing (if the result exceeds 360, 360 is subtracted).

On a moving-card indicator or RMI, the card rotates with the heading, so the needle points directly to the QDM.

Homing means flying towards the station while keeping the needle on the nose; in wind this produces a curved track.

Tracking means following a specific QDM/QDR line by applying a wind correction.

For the pilot, the ADF is a basic tool used especially for backup navigation and NDB approach procedures.

Example

Magnetic heading 040°, RB 090° → QDM = 130°.
TEST YOURSELF

MH 300°, RB 120°. What is the QDM?

How it is asked in the PPL exam: 3 questions

Think about your answer, then reveal it.

1. What is the relationship between an NDB and an ADF in an aircraft navigation system?

  1. ADF is a civilian equipment whereas NDB is a military equipment used by civilians too.
  2. NDB is a locator and ADF is an enroute nav-aid.
  3. ADF is a ground equipment and NDB can be a ground equipment or an airborne equipment.
  4. NDB is a ground equipment , and ADF is an airborne equipment.
Show answer

Correct answer: NDB is a ground equipment , and ADF is an airborne equipment.

The NDB (Non-Directional Beacon) is ground-based radio transmitter equipment, while the ADF (Automatic Direction Finder) is the airborne receiver and display equipment installed in the aircraft that receives signals from the NDB.

2. Which components are part of an Automatic Direction Finder (ADF) system installed in an aircraft?

  1. 1,2,4 and 5.
  2. 1,2,3 and 4.
  3. 2,3,4 and 5.
  4. all of the above.
Show answer

Correct answer: 1,2,4 and 5.

The ADF system comprises airborne equipment only: a receiver unit, a cockpit display (RMI or similar), a loop antenna (directional), and a sense antenna (omnidirectional). The NDB itself is ground-based equipment, not part of the airborne ADF system.

3. How can a pilot confirm that the ADF is correctly tuned to the intended NDB station?

  1. By the NDB's morse code indication
  2. By the accuracy of the QDM
  3. By the movement of the Radio Magnetic Indicator
  4. By the direction in which the ADF needle swings
Show answer

Correct answer: By the NDB's morse code indication

Each NDB transmits a unique Morse code identification signal. The pilot must listen to this Morse code identifier to positively confirm that the correct station has been tuned and is being received.

Solve 10 free questions from this subject →

Frequently asked questions about ADF

What does ADF stand for?

ADF stands for "Automatic Direction Finder". It refers to the system that determines the relative bearing of the aircraft to NDB stations.

What conditions are required to use the ADF?

The aircraft needs a serviceable ADF receiver and a transmitting NDB station. The pilot is also expected to use the indicator correctly and confirm that the station's transmission is reliable.

What is the difference between ADF and VOR?

The ADF shows the direction of the signal from NDB stations. The VOR operates in the VHF band and provides the aircraft with radial information from the station.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]