Tavan
Ceiling
Türkçe: Bulut tavanı
Tavan, gökyüzünün yarısından fazlasını (BKN ya da OVC) kaplayan en alçak bulut katmanının, 20.000 ft altındaki taban yüksekliğidir.
Tavan nedir?
ICAO tanımına göre tavan, 6.000 m (20.000 ft) altında gökyüzünün yarısından fazlasını kaplayan en alçak bulut tabakasının tabanıdır. Pratikte METAR'daki ilk BKN ya da OVC grubu tavanı verir; dikey görüş (VV) grubu varsa o da tavan yerine geçer.
Tavan, VFR karar verirken görüşle birlikte en önemli değerdir: kontrol bölgesinde normal VFR için genellikle 1.500 ft tavan, Özel VFR için en az 600 ft tavan aranır. Yaklaşma minimumları ve yedek meydan seçimi de tavana göre değerlendirilir.
Örnek
"FEW006 SCT010 BKN018 OVC040" için tavan kaç ft'tir?
Tavan, ilk BKN veya OVC katmanıdır: BKN018 = 1.800 ft.
ATPL sınavında bu konu nasıl sorulur? 3 soru
Sorular sınavdaki gibi İngilizcedir. Cevabını düşün, sonra aç.
1. You are planning a non-precision straight-in approach. Which pieces of information must you consider? (1) RVR or visibility (2) ceiling (3) minimum descent altitude or height (MDA/H) (4) decision altitude or height (DA/H). Which combination lists all the correct information?
- 1 - 4
- 1 - 2 - 3
- 1 - 2 - 4
- 1 - 3
Cevabı göster
Doğru cevap: 1 - 3
Non-precision approaches require RVR/visibility and MDA/H. DA/H is used only for precision approaches; ceiling is not a regulatory requirement for non-precision minima.
2. Which items must be included in the Aerodrome Operating Minima for a non-precision approach? Select all that apply: 1 - required RVR, 2 - ceiling, 3 - minimum descent height (MDH), 4 - decision height (DH).
- 1, 2, 4.
- 1, 2, 3.
- 1, 3.
- 1, 4.
Cevabı göster
Doğru cevap: 1, 2, 3.
Non-precision approaches use MDH (not DH, which is for precision approaches) and require both RVR and ceiling as operating minima. Decision height applies only to precision approaches.
3. Which items must be considered for a standard straight-in approach? (1) RVR/Visibility (2) ceiling (3) minimum descent altitude/height (4) decision altitude/height
- 1 - 3
- 1 - 2 - 4
- 1 - 4
- 1 - 2 - 3
Cevabı göster
Doğru cevap: 1 - 3
For a straight-in non-precision approach, RVR/visibility and MDA/H are the critical factors. Decision altitude/height applies to precision approaches, and ceiling is not a regulatory minima term.
Resmi Kaynaklar ve İleri Okuma
- ICAO Annex 3 — Meteorological Service for International Air Navigation
- NOAA Aviation Weather Center (METAR, TAF, SIGMET)
- FAA — Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C)
- EASA Easy Access Rules — Standardised European Rules of the Air (SERA)
- AIP Türkiye — DHMİ Havacılık Bilgi Yayını
Bu yazı eğitim amaçlıdır; uçuşta güncel resmi yayınlar (AIP, NOTAM, uçağın POH/AFM'i) esas alınır.
Son güncelleme: · Hata bildirimi: [email protected]