Ceiling

Turkish: Tavan

PPLATPL Meteorology
IN SHORT

The ceiling is the height above ground of the lowest cloud layer covering more than half the sky (BKN or OVC), where that base lies below 20,000 ft.

What is Ceiling?

Under the ICAO definition, the ceiling is the base of the lowest cloud layer below 6,000 m (20,000 ft) that covers more than half the sky. In practice, the first BKN or OVC group in a METAR gives the ceiling; if a vertical visibility (VV) group is reported, it also serves as the ceiling instead.

For VFR decision-making the ceiling is, together with visibility, the most important value: within a control zone, normal VFR generally requires a ceiling of at least 1,500 ft, and Special VFR requires a ceiling of at least 600 ft. Approach minima and alternate aerodrome selection are also assessed against the ceiling.

Example

FEW008 BKN014 OVC030 → ceiling 1,400 ft (first BKN).
TEST YOURSELF

What is the ceiling in feet for "FEW006 SCT010 BKN018 OVC040"?

How it is asked in the ATPL exam: 3 questions

Think about your answer, then reveal it.

1. You are planning a non-precision straight-in approach. Which pieces of information must you consider? (1) RVR or visibility (2) ceiling (3) minimum descent altitude or height (MDA/H) (4) decision altitude or height (DA/H). Which combination lists all the correct information?

  1. 1 - 4
  2. 1 - 2 - 3
  3. 1 - 2 - 4
  4. 1 - 3
Show answer

Correct answer: 1 - 3

Non-precision approaches require RVR/visibility and MDA/H. DA/H is used only for precision approaches; ceiling is not a regulatory requirement for non-precision minima.

2. Which items must be included in the Aerodrome Operating Minima for a non-precision approach? Select all that apply: 1 - required RVR, 2 - ceiling, 3 - minimum descent height (MDH), 4 - decision height (DH).

  1. 1, 2, 4.
  2. 1, 2, 3.
  3. 1, 3.
  4. 1, 4.
Show answer

Correct answer: 1, 2, 3.

Non-precision approaches use MDH (not DH, which is for precision approaches) and require both RVR and ceiling as operating minima. Decision height applies only to precision approaches.

3. Which items must be considered for a standard straight-in approach? (1) RVR/Visibility (2) ceiling (3) minimum descent altitude/height (4) decision altitude/height

  1. 1 - 3
  2. 1 - 2 - 4
  3. 1 - 4
  4. 1 - 2 - 3
Show answer

Correct answer: 1 - 3

For a straight-in non-precision approach, RVR/visibility and MDA/H are the critical factors. Decision altitude/height applies to precision approaches, and ceiling is not a regulatory minima term.

Solve 10 free questions from this subject →

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]