RNAV
Area Navigation
Türkçe: Alan Seyrüseferi
RNAV, uçağın GPS, INS, VOR, DME gibi çeşitli navigasyon kaynaklarını birleştirerek konumunu belirlemesi ve geleneksel tesislere bağlı kalmadan herhangi bir rota izlemesini sağlayan modern seyrüsefer sistemidir.
RNAV nedir?
RNAV, uçağın konumunu belirlemek için çeşitli navigasyon kaynaklarını (GPS, INS, VOR, DME vb.) kullanan modern bir seyrüsefer sistemidir. Pilot veya otopilot tarafından, geleneksel navigasyon tesislerine bağlı kalmadan herhangi bir rota çizilebilir. RNAV sayesinde uçaklar daha doğru, verimli ve kısa rotalar izleyebilir. Bu teknoloji yakıt tasarrufu sağlar, hava trafik yoğunluğunu azaltır ve operasyonel esnekliği artırır. Modern havacılıkta yaygın olarak kullanılan standart bir seyrüsefer yöntemidir.
Örnek
Bir RNAV 5 onaylı uçak, rota üzerinde kalma garantisinin ne olması beklenir?
RNP 5, uçağın rota üzerinde 95% zaman içinde 5 deniz milinin içinde kalması anlamına gelir. Bu, istatistiksel bir performans standardıdır ve RNAV sisteminin doğruluğunu tanımlar.
ATPL sınavında bu konu nasıl sorulur? 3 soru
Sorular sınavdaki gibi İngilizcedir. Cevabını düşün, sonra aç.
1. What does the abbreviation RNAV mean?
- Radar aided navigation
- Radio navigation
- Route navigation
- Area navigation
Cevabı göster
Doğru cevap: Area navigation
RNAV, Alan Navigasyonu (Area Navigation) anlamına gelir.
2. You are flying between two waypoints using a 2D RNAV system. You have entered DME and VOR data for both waypoints. How does the system calculate your cross-track error during the flight?
- The pilot will have to calculate the wind and apply it to the VOR/DME information
- The pilot takes the VOR and DME information and computes it himself
- The pilot is presented with VOR/DME information which must then be correlated to the pressure instruments to determine the effect of altitude
- Use the automatically computed values on the CDI/HSI.
Cevabı göster
Doğru cevap: Use the automatically computed values on the CDI/HSI.
A 2D RNAV system automatically computes cross-track error from the VOR/DME inputs and displays it on the CDI/HSI. The pilot does not need to calculate this manually.
3. When you enter a phantom waypoint into your RNAV system using a VOR/DME station as reference, what range requirement applies?
- the referenced station must be positively identified by at least 1 pilot
- you must be in range of the referenced station to enter or use it
- don''t need to be in range of the referenced station to enter or use it
- you don''t need to be within range of the referenced station to enter the waypoint, but you must be to use it
Cevabı göster
Doğru cevap: you don''t need to be within range of the referenced station to enter the waypoint, but you must be to use it
A phantom waypoint can be entered when out of range of the station, but you must be within range of that station to actually use the waypoint for navigation.
Resmi Kaynaklar ve İleri Okuma
- FAA — Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C)
- FAA — Aeronautical Information Manual (AIM)
- AIP Türkiye — DHMİ Havacılık Bilgi Yayını
- FAA — Instrument Procedures Handbook
- FAA — Instrument Flying Handbook (FAA-H-8083-15B, PDF)
Bu yazı eğitim amaçlıdır; uçuşta güncel resmi yayınlar (AIP, NOTAM, uçağın POH/AFM'i) esas alınır.
Son güncelleme: · Hata bildirimi: [email protected]