RNAV
Navegação de Área (RNAV)
RNAV is a modern navigation system that combines various navigation sources such as GPS, INS, VOR and DME to determine the aircraft's position and allows it to follow any route without depending on conventional ground facilities.
O que é RNAV?
RNAV is a modern navigation system that uses various navigation sources (such as GPS, INS, VOR and DME) to determine the aircraft's position. The pilot or autopilot can plot any route without depending on conventional navigation facilities.
RNAV allows aircraft to fly more accurate, efficient and shorter routes. This technology saves fuel, reduces air traffic congestion and increases operational flexibility.
It is a standard navigation method widely used in modern aviation.
Exemplo
What performance is expected from an aircraft approved for RNAV 5 in terms of staying on route?
RNP 5 means the aircraft stays within 5 nautical miles of the route for 95% of the time. This is a statistical performance standard and defines the accuracy of the RNAV system.
Como é cobrado na prova ATPL: 3 questões
Pense na sua resposta e depois revele-a.
Os exames teóricos de conhecimento da EASA são realizados em inglês, por isso as perguntas e as opções de resposta são mostradas em inglês. Abra a tradução abaixo de cada pergunta se precisar; as explicações estão no seu idioma.
1. What does the abbreviation RNAV mean?
- Radar aided navigation
- Radio navigation
- Route navigation
- Area navigation
🌐 Português · Mostrar tradução
O que significa a abreviatura RNAV?
- A) Navegação assistida por radar
- B) Radionavegação
- C) Navegação de rota
- D) Navegação de área
Mostrar resposta
Resposta correta: Area navigation
RNAV significa Area Navigation (Navegação de Área), uma técnica de navegação que permite à aeronave voar qualquer trajetória desejada dentro da cobertura de auxílios à navegação terrestres ou espaciais.
2. You are flying between two waypoints using a 2D RNAV system. You have entered DME and VOR data for both waypoints. How does the system calculate your cross-track error during the flight?
- The pilot will have to calculate the wind and apply it to the VOR/DME information
- The pilot takes the VOR and DME information and computes it himself
- The pilot is presented with VOR/DME information which must then be correlated to the pressure instruments to determine the effect of altitude
- Use the automatically computed values on the CDI/HSI.
🌐 Português · Mostrar tradução
Você está voando entre dois waypoints usando um sistema RNAV 2D. Você inseriu dados de DME e VOR para os dois waypoints. Como o sistema calcula seu erro de rota (cross-track error) durante o voo?
- A) O piloto terá que calcular o vento e aplicá-lo às informações de VOR/DME
- B) O piloto pega as informações de VOR e DME e as calcula por conta própria
- C) O piloto recebe informações de VOR/DME, que então devem ser correlacionadas com os instrumentos de pressão para determinar o efeito da altitude
- D) Use os valores calculados automaticamente no CDI/HSI.
Mostrar resposta
Resposta correta: Use the automatically computed values on the CDI/HSI.
Um sistema RNAV 2D calcula automaticamente o erro de rota a partir das entradas de VOR/DME e o exibe no CDI/HSI. O piloto não precisa calcular isso manualmente.
3. When you enter a phantom waypoint into your RNAV system using a VOR/DME station as reference, what range requirement applies?
- the referenced station must be positively identified by at least 1 pilot
- you must be in range of the referenced station to enter or use it
- don''t need to be in range of the referenced station to enter or use it
- you don''t need to be within range of the referenced station to enter the waypoint, but you must be to use it
🌐 Português · Mostrar tradução
Ao inserir um waypoint fantasma no seu sistema RNAV usando uma estação VOR/DME como referência, qual requisito de alcance se aplica?
- A) a estação de referência deve ser positivamente identificada por pelo menos 1 piloto
- B) você deve estar no alcance da estação de referência para inseri-lo ou usá-lo
- C) não precisa estar no alcance da estação referenciada para inseri-lo ou usá-lo
- D) você não precisa estar dentro do alcance da estação de referência para inserir o waypoint, mas precisa estar para usá-lo
Mostrar resposta
Resposta correta: you don''t need to be within range of the referenced station to enter the waypoint, but you must be to use it
Um waypoint fantasma pode ser inserido quando fora do alcance da estação, mas você deve estar dentro do alcance dessa estação para de fato usar o waypoint na navegação.
Frequently asked questions about RNAV
What is the difference between RNAV and conventional navigation?
RNAV (Area Navigation) is position determination by combining sources such as GPS, INS, VOR and DME. In conventional navigation the aircraft has to pass over ground facilities; with RNAV any route can be plotted.
What does a shorter, more efficient RNAV route provide?
RNAV allows aircraft to fly more accurate, efficient and shorter routes. This saves fuel, reduces air traffic congestion and increases operational flexibility.
Traduzido por máquina (IA) a partir do nosso Turkish glossary entry usando a terminologia ICAO/EASA. Atualizado em 20 nov 2026 · Relatar um erro: [email protected]