RNAV

Navegación de área

PPLATPLIR Navegación general
IN SHORT

RNAV is a modern navigation system that combines various navigation sources such as GPS, INS, VOR and DME to determine the aircraft's position and allows it to follow any route without depending on conventional ground facilities.

¿Qué es RNAV?

RNAV is a modern navigation system that uses various navigation sources (such as GPS, INS, VOR and DME) to determine the aircraft's position. The pilot or autopilot can plot any route without depending on conventional navigation facilities.

RNAV allows aircraft to fly more accurate, efficient and shorter routes. This technology saves fuel, reduces air traffic congestion and increases operational flexibility.

It is a standard navigation method widely used in modern aviation.

Ejemplo

On the flight plan: RNAV 5 approved. The pilot can enter a direct route from LFPG to EGLL into the FMS; the system automatically follows the waypoints and updates its position using GPS/INS data.
TEST YOURSELF

What performance is expected from an aircraft approved for RNAV 5 in terms of staying on route?

Cómo se pregunta en el examen ATPL: 3 preguntas

Piensa tu respuesta y luego muéstrala.

Los exámenes teóricos EASA se realizan en inglés, por lo que las preguntas y las opciones de respuesta se muestran en inglés. Abre la traducción bajo cada pregunta si la necesitas; las explicaciones están en tu idioma.

1. What does the abbreviation RNAV mean?

  1. Radar aided navigation
  2. Radio navigation
  3. Route navigation
  4. Area navigation
🌐 Español · Mostrar traducción

¿Qué significa la abreviatura RNAV?

  • A) Navegación asistida por radar
  • B) Radionavegación
  • C) Navegación en ruta
  • D) Navegación de área
Mostrar respuesta

Respuesta correcta: Area navigation

RNAV significa navegación de área, una técnica de navegación que permite a una aeronave volar cualquier trayectoria de vuelo deseada dentro de la cobertura de ayudas a la navegación basadas en tierra o en el espacio.

2. You are flying between two waypoints using a 2D RNAV system. You have entered DME and VOR data for both waypoints. How does the system calculate your cross-track error during the flight?

  1. The pilot will have to calculate the wind and apply it to the VOR/DME information
  2. The pilot takes the VOR and DME information and computes it himself
  3. The pilot is presented with VOR/DME information which must then be correlated to the pressure instruments to determine the effect of altitude
  4. Use the automatically computed values on the CDI/HSI.
🌐 Español · Mostrar traducción

Vuelas entre dos puntos de paso usando un sistema RNAV 2D. Has introducido datos DME y VOR para ambos puntos de paso. ¿Cómo calcula el sistema tu error de derrota transversal durante el vuelo?

  • A) El piloto tendrá que calcular el viento y aplicarlo a la información VOR/DME
  • B) El piloto toma la información VOR y DME y la calcula él mismo
  • C) Se presenta al piloto información VOR/DME que debe correlacionarse después con los instrumentos de presión para determinar el efecto de la altitud
  • D) Usar los valores calculados automáticamente en el CDI/HSI.
Mostrar respuesta

Respuesta correcta: Use the automatically computed values on the CDI/HSI.

Un sistema RNAV 2D calcula automáticamente el error de derrota transversal a partir de los datos VOR/DME y lo muestra en el CDI/HSI. El piloto no necesita calcularlo manualmente.

3. When you enter a phantom waypoint into your RNAV system using a VOR/DME station as reference, what range requirement applies?

  1. the referenced station must be positively identified by at least 1 pilot
  2. you must be in range of the referenced station to enter or use it
  3. don''t need to be in range of the referenced station to enter or use it
  4. you don''t need to be within range of the referenced station to enter the waypoint, but you must be to use it
🌐 Español · Mostrar traducción

Al introducir un punto de referencia fantasma en su sistema RNAV usando como referencia una estación VOR/DME, ¿qué requisito de alcance se aplica?

  • A) la estación de referencia debe ser identificada positivamente por al menos 1 piloto
  • B) hay que estar dentro del alcance de la estación de referencia para introducirlo o usarlo
  • C) no es necesario estar dentro del alcance de la estación de referencia para introducirlo o usarlo
  • D) no es necesario estar dentro del alcance de la estación de referencia para introducir el punto, pero sí para usarlo
Mostrar respuesta

Respuesta correcta: you don''t need to be within range of the referenced station to enter the waypoint, but you must be to use it

Se puede introducir un punto de referencia fantasma cuando se está fuera del alcance de la estación, pero hay que estar dentro del alcance de dicha estación para usar realmente el punto de referencia en la navegación.

Resuelve 10 preguntas gratuitas de este tema →

Frequently asked questions about RNAV

What is the difference between RNAV and conventional navigation?

RNAV (Area Navigation) is position determination by combining sources such as GPS, INS, VOR and DME. In conventional navigation the aircraft has to pass over ground facilities; with RNAV any route can be plotted.

What does a shorter, more efficient RNAV route provide?

RNAV allows aircraft to fly more accurate, efficient and shorter routes. This saves fuel, reduces air traffic congestion and increases operational flexibility.

Traducido automáticamente (IA) desde nuestro Turkish glossary entry utilizando la terminología OACI/EASA. Actualizado el 20 nov 2026 · Notificar un error: [email protected]