Erro de pressão estática

Turco: Statik Basınç Hatası

PPLATPLIR Princípios de voo
IN SHORT

O erro de pressão estática é um desvio de medição que ocorre na tomada de pressão estática do sistema pitot-estático, afetando o altímetro, o indicador de velocidade e o variômetro.

O que é erro de pressão estática?

Static pressure error is a systematic measurement deviation caused by incorrect positioning, blockage or design fault of the static pressure port opened on the aircraft fuselage. This error is transmitted to the altimeter, airspeed indicator (IAS) and variometer through the static line of the pitot-static system.

Sources of error include the static port being affected by airflow, icing, contamination, or the aircraft's geometry disturbing the static pressure field. The error may grow especially at high angles of attack, at high speeds or in certain flight configurations (flaps extended, landing gear down).

It is critical for the pilot: an error in altitude measurement prevents flying at the correct pressure level, and an error in speed measurement makes performance calculations inaccurate. System calibration and periodic checks (pitot-static system check) minimise errors. Correction factors specified in the Aircraft Flight Manual (AFM) must be applied.

Exemplo

Example: If an aircraft is calibrated with a static pressure error of +50 ft at sea level, the altimeter reads 5000 ft while the true altitude is 4950 ft. A similar deviation is seen on the airspeed indicator. The pilot must use the correction table in the AFM to calculate the true values.

Frequentemente confundido com

Erro de pressão estáticaBloqueio do tubo de PitotBloqueio da tomada estática
Desvio sistemático e mensurávelO indicador de velocidade indica valor baixoMau funcionamento do altímetro e do indicador de velocidade
Fator de correção do AFM é aplicadoPitot heater may not be workingAlternative static source (cabin) is used
Constante durante o vooRepentino, ocorre durante o vooSúbito, geralmente causado por formação de gelo
TEST YOURSELF

An aircraft's pitot-static system has a static pressure error of +100 ft. The altimeter reads 3000 ft; what is the true altitude in feet?

Frequently asked questions about Static pressure error

Which instruments are affected by static pressure error?

Static pressure error affects the altimeter, airspeed indicator (IAS) and variometer through the static line of the pitot-static system.

How is static pressure error reduced?

System calibration and periodic pitot-static system checks minimise errors. Correction factors specified in the Aircraft Flight Manual (AFM) must also be applied.

Traduzido por máquina (IA) a partir do nosso Turkish glossary entry usando a terminologia ICAO/EASA. Atualizado em 18 nov 2026 · Relatar um erro: [email protected]