Error de presión estática
Turco: Statik Basınç Hatası
El error de presión estática es una desviación de medida que se produce en la entrada de presión estática del sistema pitot-estático, y afecta al altímetro, al indicador de velocidad y al variómetro.
¿Qué es el error de presión estática?
Static pressure error is a systematic measurement deviation caused by incorrect positioning, blockage or design fault of the static pressure port opened on the aircraft fuselage. This error is transmitted to the altimeter, airspeed indicator (IAS) and variometer through the static line of the pitot-static system.
Sources of error include the static port being affected by airflow, icing, contamination, or the aircraft's geometry disturbing the static pressure field. The error may grow especially at high angles of attack, at high speeds or in certain flight configurations (flaps extended, landing gear down).
It is critical for the pilot: an error in altitude measurement prevents flying at the correct pressure level, and an error in speed measurement makes performance calculations inaccurate. System calibration and periodic checks (pitot-static system check) minimise errors. Correction factors specified in the Aircraft Flight Manual (AFM) must be applied.
Ejemplo
A menudo confundido con
| Error de presión estática | Obstrucción del tubo pitot | Obstrucción de la toma estática |
|---|---|---|
| Desviación sistemática y medible | El indicador de velocidad marca bajo | Mal funcionamiento del altímetro y del indicador de velocidad |
| Se aplica el factor de corrección del AFM | Pitot heater may not be working | Alternative static source (cabin) is used |
| Constante durante el vuelo | Repentino, aparece durante el vuelo | Repentino, normalmente causado por formación de hielo |
An aircraft's pitot-static system has a static pressure error of +100 ft. The altimeter reads 3000 ft; what is the true altitude in feet?
If the static pressure error is +100 ft, the system is measuring 100 ft higher pressure. This causes the altimeter to read 100 ft higher. True altitude = 3000 - 100 = 2900 ft.
Frequently asked questions about Static pressure error
Which instruments are affected by static pressure error?
Static pressure error affects the altimeter, airspeed indicator (IAS) and variometer through the static line of the pitot-static system.
How is static pressure error reduced?
System calibration and periodic pitot-static system checks minimise errors. Correction factors specified in the Aircraft Flight Manual (AFM) must also be applied.
Traducido automáticamente (IA) desde nuestro Turkish glossary entry utilizando la terminología OACI/EASA. Actualizado el 18 nov 2026 · Notificar un error: [email protected]