Statischer Druckfehler

Türkisch: Statik Basınç Hatası

PPLATPLIR Flugphysik
IN SHORT

Der Statikdruckfehler ist eine Messabweichung, die am Statikdruckeinlass des Pitot-Statik-Systems auftritt und den Höhenmesser, den Fahrtmesser und das Variometer beeinflusst.

Was ist der Statikdruckfehler?

Static pressure error is a systematic measurement deviation caused by incorrect positioning, blockage or design fault of the static pressure port opened on the aircraft fuselage. This error is transmitted to the altimeter, airspeed indicator (IAS) and variometer through the static line of the pitot-static system.

Sources of error include the static port being affected by airflow, icing, contamination, or the aircraft's geometry disturbing the static pressure field. The error may grow especially at high angles of attack, at high speeds or in certain flight configurations (flaps extended, landing gear down).

It is critical for the pilot: an error in altitude measurement prevents flying at the correct pressure level, and an error in speed measurement makes performance calculations inaccurate. System calibration and periodic checks (pitot-static system check) minimise errors. Correction factors specified in the Aircraft Flight Manual (AFM) must be applied.

Beispiel

Example: If an aircraft is calibrated with a static pressure error of +50 ft at sea level, the altimeter reads 5000 ft while the true altitude is 4950 ft. A similar deviation is seen on the airspeed indicator. The pilot must use the correction table in the AFM to calculate the true values.

Wird oft verwechselt mit

Statischer DruckfehlerVerstopfung des PitotrohrsBlockierung der statischen Öffnung
Systematische, messbare AbweichungFahrtmesser zeigt zu wenig anFehlfunktion von Höhenmesser und Fahrtmesser
Der AFM-Korrekturfaktor wird angewendetPitot heater may not be workingAlternative static source (cabin) is used
Während des Flugs konstantPlötzlich, tritt während des Flugs aufPlötzlich, meist durch Vereisung verursacht
TEST YOURSELF

An aircraft's pitot-static system has a static pressure error of +100 ft. The altimeter reads 3000 ft; what is the true altitude in feet?

Frequently asked questions about Static pressure error

Which instruments are affected by static pressure error?

Static pressure error affects the altimeter, airspeed indicator (IAS) and variometer through the static line of the pitot-static system.

How is static pressure error reduced?

System calibration and periodic pitot-static system checks minimise errors. Correction factors specified in the Aircraft Flight Manual (AFM) must also be applied.

Maschinell übersetzt (KI) aus unserem Turkish glossary entry unter Verwendung der ICAO/EASA-Terminologie. Aktualisiert am 18. Nov 2026 · Fehler melden: [email protected]