IR Procedures: Learn Instrument Flying Step by Step
8 Modules from Zero to Approach
Modules follow the order of flight: first instruments and equipment, then take-off, arrival, approach and holding. At the end of each lesson, practise with a simulator or an instructor.
-
Lesson ready
IFR Fundamentals
IMC and VMC, IFR flight plan, ATC clearance pattern, instrument scan and basic instrument flying.
-
Lesson ready
Radio Navigation Aids
How VOR, NDB/ADF, DME and ILS work; interpreting radials, bearings and needles.
-
Lesson ready
Departure: SID and Climb
SID reading, climb via SID, climb gradient (ft/NM → ft/min), altitude and speed restrictions, fly-by and fly-over.
-
Lesson ready
Arrival: STAR and Descent
STAR reading, descend via STAR, altitude windows, speed limits and top of descent (TOD).
-
Lesson ready
Reading an Approach Chart (ILS)
Briefing strip, plan and profile view, FAP, DA(H), MSA, go-around and minima: on an interactive sample chart.
-
Lesson ready
Non-Precision and RNP Approaches
VOR, NDB and LOC approaches, CDFA and VDP, RNP (LPV, LNAV/VNAV, LNAV) minima and which one to use.
-
Lesson ready
Holding
Holding pattern, entry types (direct, parallel, teardrop), wind correction, speed and time limits.
-
Lesson ready
Minima and Go-Around
DA and MDA, aircraft categories, ILS CAT I/II/III, RVR, approach ban and go-around procedure.
IR Simulators and Tools
Try what you've read by flying it straight away. Simulators run in the browser, no installation needed.
Chart Study Room
Step-by-step briefings on real procedures, exploring waypoints and self-testing. Your progress is saved.
Sign Up Free, Work with Charts
Guided briefings, point tests and procedure questions on SID, STAR, VOR and ILS procedures are open to members.
Frequently Asked Questions
What is IR (Instrument Rating)?
The IR is the rating that allows a pilot to fly under instrument flight rules (IFR) in instrument meteorological conditions (IMC), relying solely on flight instruments when visibility is insufficient. It is mandatory for airline pilots; ATPL training includes the IR.
What Is Needed to Start IR Training?
According to EASA, the IR(A) requires at least a PPL and 50 hours of cross-country flight as pilot-in-command. The theoretical training consists of 7 lessons: air law, instrument knowledge, flight planning, human performance, meteorology, radio navigation and IFR communications.
How Should I Learn to Read an Approach Chart?
First learn the sections of the chart (heading, briefing strip, plan, profile, minima) on a single example, then read charts of different aerodromes in the same order. Our interactive ILS chart guide shows this order step by step.
What Is the Difference Between Precision and Non-Precision Approaches?
On a precision approach (ILS, GLS) there is both lateral and vertical guidance, and descent continues to the decision altitude (DA). On a non-precision approach (VOR, NDB, LOC, LNAV) there is only lateral guidance and the minimum descent altitude (MDA) is used. RNP approaches with vertical guidance such as LPV and LNAV/VNAV lie between the two (APV).