ATC Trainer: Radio Conversation with the Tower

Choose the aerodrome, enter your callsign and parking position, and choose your task (E1, E2…); the tower guides you to the parking position from engine start with real phraseology. Type your callsign or speak it into the microphone; if information is missing, the tower says "say again" and the coach card shows what you forgot. English and Turkish phraseology.

Student pilotPPLCommunicationsAudioNew
In short: How to talk to the tower?

When calling the tower, first say the station name, then your callsign, then your message: "PAMUKOVA TOWER, TCUZA, READY FOR TAXI AND FLIGHT INFORMATION." Read back the runway, QNH, taxi route, altitude and clearances given by the tower, and end the sentence with your callsign: "RUNWAY 25 CLEARED TO LAND, TCUZA." If a message is not understood, say "SAY AGAIN".

Flight preparation

  1. 1 · Aerodrome
    Runway in use
  2. 4 · Flight mission
  3. 5 · What is your training tomorrow?
    Your stand preference
    The tower sometimes approves the stand you asked for, and sometimes, because it is full, directs you to another stand or to 3000 ft over the aerodrome.
    Sites numbered 2 (Whisky 2, Echo 2) are high ground: on entering the runway you receive a climb instruction to 3000 ft above aerodrome, and on turning you receive a 3 mile warning at 3000 ft followed by a descent instruction.
  4. 6 · Phraseology and voice
    Frequency congestion
    On a busy frequency the tower talks to other aircraft too, so your callsign may be blocked for a moment — only read back instructions addressed to your own callsign.

    🎙️ You can type your answers or use the microphone in the chat screen you can say it aloud (optional; Chrome/Edge).

📈 Your flight history

If you sign in completed flights are saved: you can see here which steps you got wrong, what you forget most, and your progress.

How does it work?

The flight progresses through tower radio calls in order, from engine start to parking. In each call, the station name, call sign and the information required for that call (runway, QNH, taxi route, stand, clearances…) are checked one by one; if anything is missing, the tower says “say again” and the missing items are listed. The tower reply is written in English or Turkish and can be read aloud if you wish; you can also answer by speaking into the microphone. Runway, QNH and stand status change randomly on every flight.

Test yourself

Radiotelephony and phraseology questions appear in the Communications (VFR/IFR Communications) course in the PPL and ATPL exams.

Practice ATPL questions →

This simulator is for training only. Values are representative and do not replace the aircraft’s official POH/AFM, the AIP or current weather information in real flight operations. The pilot in command is always responsible.

ATC Trainer: Radio Conversation with the Tower: the full explanation

Published: · Updated: · By: Son Yaklaşma editorial team

Why does ATC phraseology matter?

Everyone shares the same frequency on the radio. Standard phraseology keeps communication short and unambiguous with set patterns: first the station being called, then your callsign, then the message. When the tower gives an instruction, you read back safety-critical information such as runway, altitude and QNH, and end your transmission with your callsign.

Before their first solo flights, student pilots at flight schools memorise tower radio exchanges. This trainer recreates the sequence of exchanges from the school's study notes on the chat screen: you are the pilot, the system is the tower. With each call, the station name, callsign and the information to be given at that stage are checked one by one.

A training flight from start to finish

Tower exchanges for a training flight (summary of a training area task)
StagePilotTower
Engine startPAMUKOVA TOWER, TCUZA, GOOD MORNING, STAND NUMBER 3, REQUEST START UP.TCUZA, PAMUKOVA TOWER, GOOD MORNING, START UP APPROVED, QNH 1013.
ReadbackSTART UP APPROVED, QNH 1013, TCUZA.—
Taxi and flight informationPAMUKOVA TOWER, TCUZA, READY FOR TAXI AND FLIGHT INFORMATION.TCUZA, PAMUKOVA TOWER, TAXI TO HOLDING POINT ALPHA FOR RUNWAY 25 VIA ALPHA TAXIWAY, QNH 1013, GO AHEAD FOR FLIGHT INFORMATION.
Readback + flight informationTAXI TO HOLDING POINT ALPHA FOR RUNWAY 25 VIA ALPHA TAXIWAY, QNH 1013, AFTER DEPARTURE REQUEST TRAINING AREA WHISKY 1, TCUZA.TCUZA, PAMUKOVA TOWER, INFORMATION COPIED. AFTER DEPARTURE WHISKY 1 TRAINING AREA APPROVED, REPORT ENTERING.
DeparturePAMUKOVA TOWER, TCUZA, HOLDING POINT ALPHA RUNWAY 25, READY FOR DEPARTURE.TCUZA, PAMUKOVA TOWER, RUNWAY 25, CLEARED FOR TAKE OFF.
Training areaPAMUKOVA TOWER, TCUZA, ENTERING TRAINING AREA WHISKY 1, WILL REPORT END OF TRAINING.TCUZA, PAMUKOVA TOWER, ROGER.
Approach instructionPAMUKOVA TOWER, TCUZA, END OF TRAINING AREA WHISKY 1, REQUEST JOINING.TCUZA, PAMUKOVA TOWER, CONTINUE APPROACH, RUNWAY IN USE 25, QNH 1013, REPORT LEFT HAND DOWNWIND.
Circuit and landingPAMUKOVA TOWER, TCUZA, FINAL RUNWAY 25.TCUZA, PAMUKOVA TOWER, RUNWAY 25 CLEARED TO LAND.
After landingVACATING VIA ALPHA, FOLLOWING THE MARSHELLER, TCUZA.TCUZA, PAMUKOVA TOWER, VACATE RUNWAY VIA ALPHA, FOLLOW THE MARSHELLER.

Training area, traffic circuit, navigation

Readback rules

Common tower phrases and their Turkish equivalents
EnglishTurkish
START UP APPROVEDEngine start permitted
TAXI TO HOLDING POINTTaxi to holding point permitted
GO AHEADContinue
INFORMATION COPIEDInformation received
REPORT ENTERINGReport entering
LINE UP AND WAITEnter the runway and wait
BACKTRACKTaxi back along the runway
CLEARED FOR TAKE OFFTake-off cleared
DOWNWIND / BASE / FINALDownwind / base leg / final approach
TOUCH AND GO / FULL STOPTouch and go / full stop landing
VACATE RUNWAYVacate the runway
FOLLOW THE MARSHALLERFollow the apron staff's instructions

Backtrack on runway 07

If the holding point is at one end of the runway, the aircraft backtracks along the runway to take off from the far end. The tower says “LINE UP AND BACKTRACK APPROVED RUNWAY 07”; the pilot reads back the same, turns at the runway threshold and waits for take-off clearance.

The radio exchange flow is based on the Pamukova tower exchanges study notes of a flight school. This trainer is for training purposes; in real flight, the school's current procedures and the DHMİ Aviation Phraseology Handbook take precedence.

How do I use the ATC Trainer?

  1. Select aerodrome. For now at Pamukova: runways 25/07, taxiway and holding point Alpha, work areas Whisky 1–2, Echo 1–2.
  2. Describe your aircraft. Enter your callsign (e.g. TCUZA) and your stand.
  3. Choose your task. Choose the mission number between E1–E24 and tomorrow's type of training: training area, traffic circuit or navigation.
  4. Call the tower. When you press Start, the chat screen opens; your first call is an engine start request. Type it or use the microphone button to speak.
  5. Correct your omissions. If information is missing, the tower will say "say again" and the coach card will show what is missing. Hint and example buttons are always beside it.
  6. See the result. When you reach the stand, you will see your correct callsign rate on the first attempt and the information you forget most often.

Frequently asked questions

What source is this trainer based on?

The exchange order and phraseology patterns are based on a flight school's Pamukova tower communications study notes (ATC-pilot phraseology). The DHMİ Aviation Phraseology Handbook should also be read.

Can I practise with Turkish phraseology?

Yes. You can choose English or Turkish during setup; the tower also answers in the same language. The "TR/EN translation" button on the chat screen shows the equivalent of tower messages in the other language.

Can I speak with a microphone?

Yes. If your browser supports speech recognition (Chrome, Edge, Android), you can speak by pressing and holding or tapping the microphone button. Saying numbers such as "one zero one three" is fine; they are converted to digits automatically.

Why didn't the tower give me the stand I asked for?

As in real life, aerodromes are sometimes full. The tower may direct you to another aerodrome or instruct you to climb to 3000 ft over the aerodrome for separation. Reading back the instruction is enough.

In which tasks can a traffic pattern or navigation be selected?

For basic tasks E1–E8, only the working area can be selected; for E9–E16, the working area or traffic pattern; from E17 onwards, navigation can also be selected in addition to these.

Are my results being saved?

No, nothing is sent to the server. Your setup preferences and best score are stored only in your own browser. You can copy the conversation record when finished.

Can it be used in real flight?

No. The trainer is for training purposes; the runway, QNH and surface conditions are generated randomly. In real flight, your school's procedures, the AIP and the instructions given by the tower take precedence.

Sources

More calculators