Backtrack

PPLATPLIR Communications
IN SHORT

Backtrack is taxiing on the runway in the opposite direction to the landing direction. It is usually requested by ATC when the aircraft must return to the runway threshold for take-off after landing at the far end.

What is Backtrack?

Backtrack is the manoeuvre in which a pilot taxis on the runway in the exact opposite direction to the landing direction.

For example, if an aircraft has landed on runway 09 and needs to return to the threshold for take-off, and ATC requests it, the pilot taxis on runway 27 (in the opposite direction). This operation is used to shorten taxi distance, increase runway capacity and improve operational efficiency. It is applied at busy aerodromes, on narrow runways, or when air traffic density is high.

During a backtrack the pilot repositions at the centre of the runway or at the specified point and moves in the opposite direction. The most important point for the pilot is that this procedure is carried out only with explicit ATC approval; a backtrack is not performed without permission. On receiving the instruction the pilot reads back "Backtrack runway [number]". During the operation, attention to speed control, compliance with runway boundaries, and vigilance against other traffic and obstacles are critically important; the instruction may be refused if necessary.

On the radio

TWR Cessna 172 Golf-Bravo, backtrack runway 27, line up for takeoff.
PILOT Backtrack runway 27, line up for takeoff, Golf-Bravo.
TEST YOURSELF

If ATC instructs you 'Backtrack runway 09', what do you do?

Frequently asked questions about Backtrack

What is the difference between backtrack and normal taxiing?

Normal taxiing means the aircraft moves along taxiways to the runway threshold or to a parking position. A backtrack is a special manoeuvre performed on the runway itself, in the opposite direction to landing, and is carried out only with ATC approval.

Is ATC approval required for a backtrack?

Yes. A backtrack is not performed without explicit ATC approval. When the pilot receives the instruction, they confirm it by reading back "Backtrack runway [number]".

What should the pilot prioritise during a backtrack?

Compliance with runway boundaries, keeping track of other aircraft and vehicles, and speed management are the main priorities. The pilot must continuously monitor their position on the runway and report to ATC if there is any uncertainty.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]