Back Course

Turkish: Geri Yaklaşım Kursu

ATPLIR Radio Navigation
IN SHORT

The Back Course (BC) is an ILS localiser signal used for approaches from the reciprocal of the runway heading. The CDI indication is reversed and no glide slope is used.

What is Back Course?

The Back Course (BC) is a signal of the ILS localiser system that can be used from the runway exit direction, i.e. the reverse of the normal approach direction. The localiser antenna radiates a signal to the rear in addition to its main direction. This rear signal defines the runway centreline in the reverse direction and allows the aircraft to approach from this side.

On a back course approach the CDI is read in reverse. That is, the needle deflection has the opposite meaning to its meaning on a normal approach, and corrections must be made according to this reversed logic. In addition, the ILS glide slope signal is not used because it does not provide a reliable descent path in this direction; the approach is a non-precision approach flown with lateral guidance only. For this reason, minima are generally higher than for a precision approach.

For the pilot, the important point is that a back course approach may only be used where it is published on the approach chart. Approach charts show labels such as 'BC' or 'LOC BC' together with back course minima. Conditions of use, minima and correction direction may vary according to the state's AIP publication and the approach chart, so these must be followed. Training emphasises the risk of reversed deflection, distraction and incorrect corrections.

Often confused with

FeatureFront CourseBack Course
Deflection senseRead normallyRead reversed
Glide slopeUsableNot used
Approach typePrecision (ILS)Non-precision (LOC BC)
MinimaPrecision approach minimaGenerally higher, published on the approach chart
TEST YOURSELF

When using the back course signal of a localiser, which of the following is correct?

Frequently asked questions about Back Course

What is the difference between a back course approach and a normal ILS approach?

A back course approach is flown using the localiser signal radiated from behind the runway. The CDI is read reversed and, as no glide slope information is used, minima are generally higher.

How is the CDI read on a back course approach?

On a back course the CDI needle is interpreted with reversed logic, so corrections are applied opposite to a normal approach. For detailed correction rules, the approach chart and the state's AIP publication should be followed.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]