Position Report

Position Report / PIREP (Pilot Report)

Türkçe: Konum Raporu

PPLATPLIR Haberleşme
KISACA

Konum Raporu, uçuş sırasında pilotun ATC'ye verdiği standart haberleşme mesajıdır ve uçağın bulunduğu konum, irtifa, hava durumu gözlemleri gibi bilgileri içerir.

Position Report nedir?

Konum Raporu (Position Report), uçuş görevlendirmesi sırasında pilotun ATC'ye belirli aralıklarla veya talep üzerine sunduğu standart haberleşme mesajıdır. Bu rapor, uçağın mevcut konumu, uçuş seviyesi, hava durumu gözlemleri (icing, turbulence, visibility), yakıt durumu ve tahmini varış saati gibi operasyonel bilgileri içerir.

Position Report, ICAO Doc 4444 ve SERA mevzuatında tanımlanan standart format izlenerek verilir. IFR uçuşlarında ATC tarafından talep edilebilir veya pilot tarafından belirli waypoint'leri geçerken otomatik olarak sunulur. VFR uçuşlarında ise kontrol bölgesi içinde veya yoğun trafik alanlarında ATC'nin istediği durumlarda verilir.

Raporun doğruluğu ve zamanında iletilmesi, hava trafik kontrolünün uçağın konumunu takip etmesini, diğer uçaklar arasında güvenli mesafe sağlamasını ve acil durumlarda hızlı müdahale yapmasını mümkün kılar. Özellikle radar kapsama alanı dışında (oceanic airspace) veya yüksek irtifada uçuşlarda Position Report kritik önem taşır.

Telsizde

PİLOT Istanbul Approach, Turkish 42 Position Report. Latitude 41 North 28 East, Flight Level 350, estimating Ankara at 14:35, souls on board 180.
KULE Turkish 42, Position Report received. Continue present heading.
KENDİNİ DENE

Bir pilot IFR uçuşu sırasında ATC'ye Position Report verirken aşağıdakilerden hangisini MUTLAKA içermesi gerekir?

ATPL sınavında bu konu nasıl sorulur? 3 soru

Sorular sınavdaki gibi İngilizcedir. Cevabını düşün, sonra aç.

1. Your receiver is not working, but your transmitter is still operational. How should you transmit your position reports?

  1. Change to frequency 121.5 MHZ and squawk 7700.
  2. Transmit at regular times or positions, the phrase "Transmitting blind due to receiver failure".
  3. Land at the nearest uncontrolled airfield.
  4. Transmit reports at scheduled times or positions, preceded by the phrase "Transmitting blind due to receiver failure".
Cevabı göster

Doğru cevap: Transmit reports at scheduled times or positions, preceded by the phrase "Transmitting blind due to receiver failure".

When receiver failure prevents two-way communication, all transmissions must be preceded by 'Transmitting blind due to receiver failure' so that stations know they cannot receive your acknowledgement.

2. A position report to air traffic control must include the following information in order:

  1. Position / Time / Level or Altitude / Next position with ETA
  2. Call sign / Distance from the conflicting traffic / Level Time
  3. Call sign / Back-track on a runway / Transition Levels
  4. Call sign / Position / Time / Level or Altitude / Next position with ETA
Cevabı göster

Doğru cevap: Call sign / Position / Time / Level or Altitude / Next position with ETA

A complete position report contains: aircraft callsign, current position, time, flight level or altitude, and the next reporting point with estimated time of arrival.

3. What information must a pilot include in a position report to ATC?

  1. Aircraft Identification, position, level, time, next position and ETA, IFR or VFR.
  2. Position, level, time, next position and ETA.
  3. position report shall contain the following information:
  4. Aircraft Identification, position, level, time, next position and ETA.
Cevabı göster

Doğru cevap: Aircraft Identification, position, level, time, next position and ETA.

A position report must always include aircraft identification, position, flight level, time, next position and estimated time of arrival. Other details such as IFR/VFR status are not required elements of the basic position report.

Bu dersten 10 soruyu ücretsiz çöz →

Resmi Kaynaklar ve İleri Okuma

Bu yazı eğitim amaçlıdır; uçuşta güncel resmi yayınlar (AIP, NOTAM, uçağın POH/AFM'i) esas alınır.

Son güncelleme: · Hata bildirimi: [email protected]