DA
Altitude de Decisão
DA is the absolute altitude at which, during a precision approach (ILS), the pilot must abandon the landing and start a go-around if the runway cannot be seen or the aircraft is not aligned.
O que é DA?
Decision Altitude (DA) is a precise height, measured by barometric altimeter, defined for ILS Category I, II and III approaches. When DA is reached, if the pilot can clearly see the runway and approach lights and the aircraft is correctly aligned, the pilot may continue the approach to land; otherwise a go-around must be initiated immediately. DA should not be confused with DH (Descent Height), which is a different concept: DH is relative height measured from ground level, while DA is absolute height measured from mean sea level.
DA is stated in the AFM (Aircraft Flight Manual) and the IAP (Instrument Approach Procedure) chart, and may vary with factors such as temperature, wind and aircraft weight. On reaching DA, the pilot's decision-making ability should be at its highest; at this point the "go" or "no-go" decision is irreversible. According to EASA Part-FCL and ICAO Annex 6 standards, continuing the approach below DA without visual reference is prohibited.
Correct understanding and application of DA in the IR (Instrument Rating) examination and in operational flights is one of the cornerstones of aircraft safety. While approaching DA, the pilot should remain in communication with cabin crew and other crew members within the framework of CRM (Crew Resource Management) principles, and manage the decision-making process clearly.
Exemplo
Frequentemente confundido com
| Definição | Ponto de Referência | Uso |
|---|---|---|
| DA (Altitude de Decisão) | Above mean sea level (AMSL) | Ponto absoluto de decisão na aproximação ILS |
| DH (Altura de Decisão) | Above ground level (AGL) | Altura relativa em aproximação de precisão |
| MDA (Altitude Mínima de Descida) | Above mean sea level (AMSL) | Minimum height in a standard (non-precision) approach |
An ILS approach to RWY 27 has DA 300 ft AMSL. On reaching 300 ft the pilot cannot see the runway and the aircraft is 2 degrees off the approach path. What should the pilot do?
On reaching DA without visual reference and correct alignment, continuing the approach is prohibited. The pilot must immediately initiate a go-around and inform ATC of the missed approach. This is a fundamental safety rule of aircraft operation.
Frequently asked questions about DA
Qual é a diferença entre DA e DH?
DH is the relative height measured from ground level. DA is the absolute height measured from mean sea level, and the two should not be confused.
What does the pilot do on reaching DA?
If the pilot can clearly see the runway and approach lights and the aircraft is correctly aligned, the approach continues. Otherwise a go-around must be initiated immediately.
What factors can change DA?
DA is stated in the AFM and IAP chart. It may vary with factors such as temperature, wind and aircraft weight.
Traduzido por máquina (IA) a partir do nosso Turkish glossary entry usando a terminologia ICAO/EASA. Atualizado em 18 nov 2026 · Relatar um erro: [email protected]