DA

Decision Altitude

PPLATPLIR Instrument Flight (IR)
IN SHORT

DA is the absolute altitude during a precision (ILS) approach at which the pilot must abandon the landing and initiate a go-around if the runway cannot be seen or the aircraft is not correctly aligned.

What is DA?

Decision Altitude (DA) is a precise altitude, measured against the barometric altimeter, defined for ILS Category I, II and III approaches. When DA is reached, if the pilot can clearly see the runway and approach lights and the aircraft is correctly aligned, the approach may continue to landing; otherwise the go-around must be initiated immediately. DA must not be confused with DH (Descent Height), which is a different concept: DH is a height measured from ground level, whereas DA is an absolute altitude measured from mean sea level.

DA is specified in the AFM (Aircraft Flight Manual) and the IAP (Instrument Approach Procedure) chart, and may vary with factors such as temperature, wind and aircraft weight. When the pilot reaches DA, their decision-making ability must be at its highest; at this point the 'go' or 'no-go' decision is irreversible. According to EASA Part-FCL and ICAO Annex 6 standards, continuing the approach below DA without visual reference is prohibited.

Correct understanding and application of DA in the IR (Instrument Rating) examination and in operational flights is one of the cornerstones of aircraft safety. When approaching DA, the pilot should remain in communication with cabin crew and other crew members within the framework of CRM (Crew Resource Management) principles, and manage the decision-making process clearly.

Example

ILS RWY 09 approach IAP chart: DA 250 ft AMSL (QNH 1013 hPa). If the pilot cannot see the runway, or the aircraft is deviated from the approach path on reaching 250 ft, the pilot immediately initiates a go-around. Radio: 'ISTANBUL APP, TURKISH 123, MISSED APPROACH RWY 09, CLIMBING TO 2000 FT.'

Often confused with

DefinitionReference pointUse
DA (Decision Altitude)Mean sea level (AMSL)Absolute decision point in ILS approach
DH (Descent Height)Ground level (AGL)Relative height in precision approach
MDA (Minimum Descent Altitude)Mean sea level (AMSL)Minimum height in non-precision approach
TEST YOURSELF

In an ILS RWY 27 approach, DA is specified as 300 ft AMSL. The pilot reaches 300 ft and cannot see the runway, and the aircraft is 2 degrees off the approach path. What should the pilot do?

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]