Ajuste do altímetro
Turco: Altimetre Ayarı
The altimeter setting is the barometric pressure value given by ATC that the pilot must set on the altimeter so that it shows the correct altitude.
O que é o Ajuste do Altímetro?
The altimeter setting is the barometric pressure value reported by the aerodrome or area control centre via ATIS, AWOS or radio communication. The pilot sets this value through the Kollsman window of the altimeter. In this way the altimeter shows the correct altitude according to the actual pressure conditions of that area.
The altimeter setting must be updated during flight because of pressure changes. This is especially critical when approaching different aerodromes or when reaching the transition level.
Um ajuste incorreto do altímetro pode causar erro de altitude e criar situações perigosas.
Exemplo
Frequentemente confundido com
| Termo | Definição | Uso |
|---|---|---|
| Ajuste do altímetro | Barometric pressure value given by ATC | Inserido na janela Kollsman |
| Altímetro | Instrumento que mostra a altitude da aeronave | Reads altitude once set |
| QNH | Mean sea level pressure reduced to local value | Usado abaixo do nível de transição |
| QNE | Pressão padrão (1013 mb) | Usado acima do nível de transição |
The pilot receives 'Altimeter setting 1011 millibars' from ATIS. What must the pilot enter in the Kollsman window of the altimeter?
The value given by ATIS is entered directly into the Kollsman window. In this example 1011 mb must be set. 1013 mb (QNE) is used only above the transition level.
Como é cobrado no exame PPL: 2 questões
Pense na sua resposta e depois revele-a.
Os exames teóricos de conhecimento da EASA são realizados em inglês, por isso as perguntas e as opções de resposta são mostradas em inglês. Abra a tradução abaixo de cada pergunta se precisar; as explicações estão no seu idioma.
1. Match each altimeter setting to its corresponding reading: 1. QFE 2. QNH 3. 1013 hPa A. Height B. Altitude C. Flight Level
- 1-A, 2-B, 3-C
- 1-A, 2-C, 3-B
- 1-B, 2-A, 3-C
- 1-C, 2-B, 3-A
🌐 Português · Mostrar tradução
Associe cada ajuste do altímetro à sua leitura correspondente: 1. QFE 2. QNH 3. 1013 hPa A. Altura B. Altitude C. Nível de voo
- A) 1-A, 2-B, 3-C
- B) 1-A, 2-C, 3-B
- C) 1-B, 2-A, 3-C
- D) 1-C, 2-B, 3-A
Mostrar resposta
Resposta correta: 1-A, 2-B, 3-C
O QFE indica altura (distância acima do aeródromo), o QNH indica altitude (distância acima do nível médio do mar), e 1013 hPa indica nível de voo (referência de pressão padrão).
2. You are taking off from an airfield where the altimeter setting cannot be obtained. What should you set your altimeter to before departure?
- The elevation of the airfield.
- The altimeter setting of the nearest controlled airport.
- The altitude zero.
- 1013.2 hPa.
🌐 Português · Mostrar tradução
Você está decolando de um aeródromo onde o ajuste do altímetro não pode ser obtido. Qual deve ser o ajuste do altímetro antes da decolagem?
- A) A elevação do aeródromo.
- B) O ajuste do altímetro do aeroporto controlado mais próximo.
- C) A altitude zero.
- D) 1013.2 hPa.
Mostrar resposta
Resposta correta: The elevation of the airfield.
Quando o ajuste do altímetro não estiver disponível, ajuste o altímetro para a elevação do aeródromo, para que ele indique zero no solo. Isso garante uma referência de altitude precisa durante a subida inicial.
Frequently asked questions about Altimeter Setting
Where is the altimeter setting obtained and how is it entered?
The altimeter setting is the barometric pressure value reported via ATIS, AWOS or radio communication; the pilot sets this value through the Kollsman window of the altimeter.
Why must the altimeter setting be updated?
It must be updated when pressure changes, when approaching different aerodromes or when reaching the transition level; an incorrect setting causes an altitude error and can lead to dangerous situations.
Traduzido por máquina (IA) a partir do nosso Turkish glossary entry usando a terminologia ICAO/EASA. Atualizado em 19 nov 2026 · Relatar um erro: [email protected]