Ajuste del altímetro
Turco: Altimetre Ayarı
The altimeter setting is the barometric pressure value given by ATC that the pilot must set on the altimeter so that it shows the correct altitude.
¿Qué es el reglaje altimétrico?
The altimeter setting is the barometric pressure value reported by the aerodrome or area control centre via ATIS, AWOS or radio communication. The pilot sets this value through the Kollsman window of the altimeter. In this way the altimeter shows the correct altitude according to the actual pressure conditions of that area.
The altimeter setting must be updated during flight because of pressure changes. This is especially critical when approaching different aerodromes or when reaching the transition level.
Un reglaje altimétrico incorrecto puede causar un error de altitud y crear situaciones peligrosas.
Ejemplo
A menudo confundido con
| Término | Definición | Uso |
|---|---|---|
| Ajuste del altímetro | Barometric pressure value given by ATC | Introducido en la ventanilla de Kollsman |
| Altímetro | Instrumento que muestra la altitud de la aeronave | Reads altitude once set |
| QNH | Mean sea level pressure reduced to local value | Se usa por debajo de la altitud de transición |
| QNE | Presión estándar (1013 mb) | Se usa por encima de la altitud de transición |
The pilot receives 'Altimeter setting 1011 millibars' from ATIS. What must the pilot enter in the Kollsman window of the altimeter?
The value given by ATIS is entered directly into the Kollsman window. In this example 1011 mb must be set. 1013 mb (QNE) is used only above the transition level.
Cómo se pregunta en el examen PPL: 2 preguntas
Piensa tu respuesta y luego muéstrala.
Los exámenes teóricos EASA se realizan en inglés, por lo que las preguntas y las opciones de respuesta se muestran en inglés. Abre la traducción bajo cada pregunta si la necesitas; las explicaciones están en tu idioma.
1. Match each altimeter setting to its corresponding reading: 1. QFE 2. QNH 3. 1013 hPa A. Height B. Altitude C. Flight Level
- 1-A, 2-B, 3-C
- 1-A, 2-C, 3-B
- 1-B, 2-A, 3-C
- 1-C, 2-B, 3-A
🌐 Español · Mostrar traducción
Relaciona cada ajuste altimétrico con su lectura correspondiente: 1. QFE 2. QNH 3. 1013 hPa A. Altura B. Altitud C. Nivel de vuelo
- A) 1-A, 2-B, 3-C
- B) 1-A, 2-C, 3-B
- C) 1-B, 2-A, 3-C
- D) 1-C, 2-B, 3-A
Mostrar respuesta
Respuesta correcta: 1-A, 2-B, 3-C
El QFE da la altura (distancia sobre el aeródromo), el QNH da la altitud (distancia sobre el nivel medio del mar) y 1013 hPa da el nivel de vuelo (referencia de presión estándar).
2. You are taking off from an airfield where the altimeter setting cannot be obtained. What should you set your altimeter to before departure?
- The elevation of the airfield.
- The altimeter setting of the nearest controlled airport.
- The altitude zero.
- 1013.2 hPa.
🌐 Español · Mostrar traducción
Está despegando de un aeródromo donde no se puede obtener el reglaje altimétrico. ¿A qué debe ajustar el altímetro antes de la salida?
- A) La elevación del aeródromo.
- B) El reglaje altimétrico del aeropuerto controlado más cercano.
- C) La altitud cero.
- D) 1013.2 hPa.
Mostrar respuesta
Respuesta correcta: The elevation of the airfield.
Cuando no se dispone del reglaje altimétrico, ajuste el altímetro a la elevación del aeródromo para que marque cero en tierra. Así se garantiza una referencia de altitud precisa durante el ascenso inicial.
Frequently asked questions about Altimeter Setting
Where is the altimeter setting obtained and how is it entered?
The altimeter setting is the barometric pressure value reported via ATIS, AWOS or radio communication; the pilot sets this value through the Kollsman window of the altimeter.
Why must the altimeter setting be updated?
It must be updated when pressure changes, when approaching different aerodromes or when reaching the transition level; an incorrect setting causes an altitude error and can lead to dangerous situations.
Traducido automáticamente (IA) desde nuestro Turkish glossary entry utilizando la terminología OACI/EASA. Actualizado el 19 nov 2026 · Notificar un error: [email protected]