Readback

PPLATPL Communications
IN SHORT

A readback is the pilot repeating back an important ATC instruction word for word to show it has been correctly understood; for certain items it is mandatory.

Qu'est-ce que la readback ?

Under ICAO procedures the following items must always be read back: route clearances; instructions to enter the runway, take off, land, cross a runway, hold short of a runway and taxi back on the runway; the runway in use; altimeter settings (QNH); transponder code; level instructions; heading and speed instructions; and the transition level. The readback ends with the callsign.

ATC listens to the readback and corrects it if it is incorrect. "Roger" or "Wilco" does not replace the readback of these items. The readback is the final safety link that confirms the agreement between the two parties.

À la radio

ATC TC-ABC, hold short of runway 24.
PILOT Holding short of runway 24, TC-ABC.
TEST YOURSELF

Quel élément ne nécessite PAS de readback ?

Comment cela est demandé à l'examen PPL : 2 questions

Réfléchissez à votre réponse, puis révélez-la.

Les examens de connaissances théoriques EASA se passent en anglais ; les questions et les options de réponse sont donc affichées en anglais. Ouvrez la traduction sous chaque question si besoin ; les explications sont dans votre langue.

1. ATC instructs you: 'TC-AYB, Change to Hezarfen Tower, 118.025.' What is your correct readback?

  1. G-CD, 118.025.
  2. Wilco, TC- AYE.
  3. 118.025TC-AYB.
  4. Change to HezarfenTower 118.025, TC- AYE.
🌐 Français · Afficher la traduction

Le contrôle vous donne l'instruction : 'TC-AYB, Change to Hezarfen Tower, 118.025.' Quelle est votre lecture de retour correcte ?

  • A) G-CD, 118.025.
  • B) Wilco, TC- AYE.
  • C) 118.025TC-AYB.
  • D) Change to HezarfenTower 118.025, TC- AYE.
Afficher la réponse

Bonne réponse : 118.025TC-AYB.

La lecture de retour d'un changement de fréquence doit comporter la nouvelle fréquence et votre indicatif, dans le bon ordre : d'abord la fréquence, puis l'indicatif en phonétique.

2. You receive this instruction: 'TC-AYE, Change to Corlu Tower, 120.375.' How do you readback correctly?

  1. 120.375 TC-AYE.
  2. G-CD, 120.375.
  3. Wilco, G-CD.
  4. Changing to Corlu Tower, TC-AYE.
🌐 Français · Afficher la traduction

Vous recevez cette instruction : « TC-AYE, passez sur la tour de Corlu, 120.375. » Comment readback-vous correctement ?

  • A) 120.375 TC-AYE.
  • B) G-CD, 120.375.
  • C) Wilco, G-CD.
  • D) Passage sur la tour de Corlu, TC-AYE.
Afficher la réponse

Bonne réponse : 120.375 TC-AYE.

Le format de readback correct pour un changement de fréquence est : la nouvelle fréquence suivie de votre indicatif en alphabet phonétique : « 120.375 TC-AYE. »

Résolvez 10 questions gratuites sur ce sujet →

Frequently asked questions about Readback

Why is the callsign spoken at the end of a readback?

The callsign is spoken at the end of the readback. ATC listens to the readback and corrects it if it is wrong, so the agreement between the two parties is confirmed.

Does "Roger" or "Wilco" replace a readback?

No. "Roger" or "Wilco" does not replace the readback of mandatory items; these items must be read back verbatim.

Traduit automatiquement (IA) à partir de notre Turkish glossary entry utilisant la terminologie OACI/EASA. Mis à jour le 18 nov. 2026 · Signaler une erreur : [email protected]