Readability
Turkish: Okunabilirlik
Readability is the ICAO scale from R1 to R5 that rates how clearly a radiotelephony transmission is understood. R1 means the message is not understood at all, and R5 means it is understood perfectly.
What is Readability?
Readability is the ICAO scale that rates how well a radiotelephony transmission can be understood by the receiving station. It is scored from 1 to 5 and expressed as R1 to R5. R1 means the message is not understood at all, while R5 means the message is understood perfectly. The scale considers not only signal strength but also the clarity of the voice and the quality of the speech.
The assessment is made by the station receiving the message. A pilot or controller uses the readability value when reporting how intelligible the other station's transmission is. This value falls when signal strength is weak, when there is interference or static noise, or when two stations transmit at the same time on the same frequency. In such cases the scale shows how far communication can still be maintained.
For the pilot, its importance lies in being able to report a communication problem correctly. If readability is poor, the pilot may request a repetition with 'SAY AGAIN' or, where appropriate, change frequency. Because an instruction that is not understood poses a serious safety risk, reporting the value correctly and applying procedures when needed is important. Details of the scale are given in ICAO Doc 9432 (Manual of Radiotelephony).
On the radio
Often confused with
| Feature | Readability (R) | Signal Strength (S) |
|---|---|---|
| What it measures | Intelligibility of the speech | Strength of the received signal |
| Scale | R1–R5 | S1–S5 |
| Typical source of problems | Interference, distorted voice | Long distance, weak signal |
What does R5 mean on the readability scale?
R5 means the message is understood perfectly. R1 is the case where nothing is understood.
Frequently asked questions about Readability
What is the difference between readability and signal strength?
Readability (R1–R5) measures how understandable the speech is, while signal strength (S1–S5) indicates the strength of the received signal. Even when the signal is strong, readability may be poor because of interference.
What does readability R2 mean and what should be done?
R2 means the message is understood only occasionally and partly. For the parts that are not understood, 'SAY AGAIN' can be used to request a repetition; if necessary, the frequency is changed.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]