RCF
Radio Communication Failure
Radio Communication Failure is the condition in which an aircraft has completely lost two-way radio communication with ATC. The pilot sets the transponder to 7600 and follows the prescribed procedures.
What is RCF?
Radio Communication Failure (RCF) is the condition in which an aircraft loses two-way radio communication with ATC. This may result from a receiver failure, a transmitter failure, or the failure of both.
In an RCF situation, the pilot first sets the transponder to 7600 and keeps this code selected. The pilot may also continue to call on the emergency frequency 121.5 MHz. The pilot continues on the route and at the level specified in the flight plan, follows the last instructions received from ATC, and tries to remain in visual meteorological conditions.
If RCF occurs during an IFR flight, the pilot may, on reaching the FAF (Final Approach Fix) or if communication is not re-established after the FAF, descend to the MDA/DA and land in visual conditions. In a VFR flight, the pilot continues flying in visual conditions and, where possible, heads for the nearest suitable aerodrome at which to land.
RCF procedures are published in ICAO Annex 2 and, by country, in the AIP. The pilot must remain on the designated route and at the designated level until communication is re-established, and must continue to keep the transponder on code 7600.
On the radio
What transponder code should an aircraft set in an RCF situation?
Code 7600 indicates radio communication failure. 7700 is emergency, 7500 is unlawful interference (hijack), and 1200 is the VFR code.
Frequently asked questions about RCF
What should the pilot do in an RCF situation?
In an RCF situation the pilot sets the transponder to 7600, continues calling on 121.5 MHz, and remains on the route and at the level in the flight plan. The pilot follows the last instructions received from ATC.
How is landing carried out if radio failure occurs during an IFR flight?
If communication cannot be established during an IFR flight, the pilot may, on reaching the FAF or if communication is not re-established after the FAF, descend to the MDA/DA and land in visual conditions. In a VFR flight the pilot continues flying in visual conditions and heads for the nearest suitable aerodrome.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 12 Nov 2026 · Report an error: [email protected]