Radar vectoring

Turkish: Radar Vektörleme

ATPLIR Instrument Flight (IR)
IN SHORT

Radar vectoring is the air traffic controller giving an aircraft direct heading instructions based on the radar picture, guiding the pilot onto the required track.

What is Radar vectoring?

Radar vectoring is the process by which the ATC (Air Traffic Control) unit monitors the position of an aircraft on the primary or secondary surveillance radar display and guides it onto the desired track by issuing heading instructions such as "turn left heading 270". With this method the controller provides separation between aircraft, sequences traffic and directs the aircraft to an approach or holding point. From the pilot's perspective, the flight is flown on the heading issued in the instruction, and the aircraft's track changes according to the controller's direction.

Radar vectoring is one of the fundamental applications of IFR (Instrument Flight Rules) procedures. In particular, during ILS approaches the controller takes the aircraft from the approach sector and establishes it on the localiser with the instruction "vectors for ILS approach". During this, the pilot sets the heading bug to the given value, either by autopilot or by hand, and confirms the instruction by readback.

When vectoring, the controller must not descend the aircraft below minimum altitudes such as the MVA (Minimum Vectoring Altitude). These values and the details of vectoring procedures are specified in the national AIP publications and ATC manuals of the state. If the pilot considers that the given heading does not respect safe altitude or performance limits, the pilot must inform ATC immediately.

On the radio

TOWER TC-ABC, turn left heading 270, vectors for ILS approach runway 18.
PILOT Left heading 270, vectors ILS runway 18, TC-ABC.
TEST YOURSELF

Which statement is correct regarding the pilot changing the aircraft's heading on their own during radar vectoring?

Frequently asked questions about Radar vectoring

What is the difference between radar vectoring and normal navigation?

In radar vectoring the aircraft's direction is determined by ATC and the pilot follows the heading issued. In normal navigation the pilot plans and follows their own route.

When is radar vectoring used?

Radar vectoring is used in IFR flights to provide separation, sequence traffic and direct the aircraft to an approach procedure such as an ILS.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 3 Nov 2026 · Report an error: [email protected]