Vector

PPLATPLIR Communications
IN SHORT

VECTOR is a specific heading instruction issued by ATC by radar, which the pilot must follow.

What is Vector?

VECTOR is a direction instruction given by air traffic control to an aircraft tracked by radar. If the pilot receives an ATC command such as "Vector 270", the pilot must set the magnetic heading to 270 degrees and fly maintaining that heading.

Vectoring is used to position the aircraft onto the approach path, to provide traffic separation, or to direct it to a specific point.

During vectoring, the pilot follows ATC instructions and maintains the assigned heading. ATC observes the aircraft's position on radar and issues the necessary corrections. The pilot may continue to use their own navigation equipment (VOR, GPS, etc.) during vectoring, but the ATC instruction takes precedence. Vectoring is commonly used in IFR flights, especially during the approach phase.

Vectoring instructions in radiotelephony must be clear and easy to understand. The pilot should read back the assigned vector and begin complying immediately upon receiving it. If a vector instruction is not understood or cannot be complied with, the pilot must inform ATC immediately.

On the radio

ATC Turkish 42, vector 180 for spacing, descend and maintain 3000 feet.
PILOT Turkish 42, vector 180, descending to 3000 feet.
ATC Turkish 42, turn left vector 150.
PILOT Left vector 150, Turkish 42.
TEST YOURSELF

If ATC issues the instruction 'Vector 270', what should the pilot do?

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]