Indicador de Velocidade
Indicador de Velocidade
Turco: ASI
The Airspeed Indicator (ASI) is a cockpit instrument that uses pitot-static system data to display the aircraft's speed relative to the air (IAS) in knots.
O que é Indicador de Velocidade?
The Airspeed Indicator (ASI) is a cockpit instrument that measures the aircraft's speed relative to the air. It mechanically processes the pressure difference received from the pitot-static system and presents it in knots on the display. The pitot tube senses dynamic pressure and the static port senses ambient pressure; the difference between these two pressures is interpreted by the indicator needle as speed.
The speed shown by the ASI is called Indicated Airspeed (IAS) and is used by the pilot for flight control, performance calculations and compliance with air traffic control instructions. The dial carries coloured markings: the white arc (flap-extended operating speeds), the green arc (normal operating speeds), the yellow arc (caution speeds) and the red line (never-exceed speed - VNE). If the pitot-static system fails, the ASI becomes unreliable; for this reason the system must be checked regularly.
At higher altitudes, the true airspeed (TAS) is higher for the same IAS; this difference must be taken into account in performance and navigation calculations.
Exemplo
An aircraft flying at 100 knots IAS at sea level climbs to 15,000 feet. What will the ASI show (under the same conditions)?
The ASI always shows IAS. Even though altitude changes, the ASI shows the same value at the same IAS. However, the true airspeed (TAS) is higher at high altitude.
Perguntas frequentes sobre Indicador de Velocidade
Qual é a diferença entre IAS e TAS?
IAS is the speed relative to the air shown by the ASI; TAS is the true airspeed. At higher altitude, TAS is higher for the same IAS value, and this difference must be taken into account in performance and navigation calculations.
What do the coloured markings on the ASI mean?
The white arc shows flap-extended operating speeds, the green arc shows normal operating speeds, and the yellow arc shows caution speeds. The red line is the VNE speed, which must never be exceeded.
Is the ASI reliable if the pitot-static system fails?
No, if the pitot-static system fails the ASI becomes unreliable. For this reason the pitot-static system must be checked regularly.
Traduzido por máquina (IA) a partir do nosso Turkish glossary entry usando a terminologia ICAO/EASA. Atualizado em 18 nov 2026 · Relatar um erro: [email protected]