Estabilidad
Turco: Dengelilik
La estabilidad es la tendencia de una aeronave a volver por sí misma a su estado original tras ser perturbada; la estabilidad longitudinal depende en gran medida de la posición del centro de gravedad.
¿Qué es la estabilidad?
Static stability describes the initial response (the tendency to return), while dynamic stability describes the motion over time (the damping of oscillations). Stability is examined about three axes: longitudinal (pitch; horizontal stabiliser and CG position), lateral (roll; wing dihedral, high wing) and directional (yaw; vertical stabiliser).
The further forward the centre of gravity, the more longitudinally stable the aircraft, but the control force becomes heavier and the stall speed rises slightly. As the CG moves aft, stability decreases and control becomes more sensitive; beyond the aft limit the aircraft may become unstable and difficult to recover from a stall or spin.
What happens if the centre of gravity is aft of the aft limit?
An aft CG reduces longitudinal stability; stall and spin recovery may become difficult.
Cómo se pregunta en el examen ATPL: 3 preguntas
Piensa tu respuesta y luego muéstrala.
Los exámenes teóricos EASA se realizan en inglés, por lo que las preguntas y las opciones de respuesta se muestran en inglés. Abre la traducción bajo cada pregunta si la necesitas; las explicaciones están en tu idioma.
1. Which characteristics must a hydraulic fluid have? Select the combination that lists only the correct properties:
1. thermal stability
2. low emulsifying characteristics
3. corrosion resistance
4. good resistance to combustion
5. high compressibility
6. high volatility
7. high viscosity
- 1, 3, 4, 6
- 2, 3, 4, 5
- 1, 2, 3, 4
- 1, 2, 5, 7
🌐 Español · Mostrar traducción
¿Qué características debe tener un fluido hidráulico? Selecciona la combinación que enumera solo las propiedades correctas:
1. estabilidad térmica
2. bajas características emulsificantes
3. resistencia a la corrosión
4. buena resistencia a la combustión
5. alta compresibilidad
6. alta volatilidad
7. alta viscosidad
- A) 1, 3, 4, 6
- B) 2, 3, 4, 5
- C) 1, 2, 3, 4
- D) 1, 2, 5, 7
Mostrar respuesta
Respuesta correcta: 1, 2, 3, 4
Los fluidos hidráulicos deben ser térmicamente estables, resistir la emulsificación y la corrosión, y resistir la combustión. La alta compresibilidad, la alta volatilidad y la alta viscosidad son propiedades no deseables que reducen la eficiencia y la seguridad del sistema.
2. An aircraft has a manoeuvre stability value of 150 N/g. What stick force is needed to pull up from level flight to a load factor of 2.5 g?
- 150 N.
- 450 N.
- 375 N.
- 225 N.
🌐 Español · Mostrar traducción
Una aeronave tiene un valor de estabilidad en maniobra de 150 N/g. ¿Qué fuerza en palanca se necesita para tirar desde vuelo nivelado hasta un factor de carga de 2.5 g?
- A) 150 N.
- B) 450 N.
- C) 375 N.
- D) 225 N.
Mostrar respuesta
Respuesta correcta: 225 N.
La estabilidad en maniobra (fuerza en palanca por g) multiplicada por el cambio en el factor de carga da la fuerza total en palanca: 150 N/g × (2.5 − 1.0) g = 225 N.
3. What happens to static longitudinal stability when the centre of gravity moves aft?
- increases static longitudinal stability.
- decreases longitudinal manoeuvrability.
- decreases static longitudinal stability.
- has no influence on longitudinal manoeuvrability.
🌐 Español · Mostrar traducción
¿Qué le ocurre a la estabilidad longitudinal estática cuando el centro de gravedad se desplaza hacia popa?
- A) aumenta la estabilidad longitudinal estática.
- B) disminuye la maniobrabilidad longitudinal.
- C) disminuye la estabilidad longitudinal estática.
- D) no influye en la maniobrabilidad longitudinal.
Mostrar respuesta
Respuesta correcta: decreases static longitudinal stability.
Un desplazamiento del CG hacia popa reduce la distancia entre el centro de gravedad y el punto neutro, disminuyendo el momento restaurador y, por tanto, la estabilidad longitudinal estática.
Frequently asked questions about Stability
What is the difference between static and dynamic stability?
Static stability describes the initial response, i.e. the tendency to return. Dynamic stability describes how the motion, i.e. the oscillations, is damped over time.
About which axes is stability examined?
Stability is examined about three axes: longitudinal (pitch), lateral (roll) and directional (yaw). Longitudinal stability depends largely on the position of the centre of gravity.
Traducido automáticamente (IA) desde nuestro Turkish glossary entry utilizando la terminología OACI/EASA. Actualizado el 18 nov 2026 · Notificar un error: [email protected]