Sky Wave
Turkish: Gökyüzü Dalgası
A sky wave is the component of a radio signal that is reflected back to the Earth's surface from the charged layers of the ionosphere.
What is Sky Wave?
A sky wave is the component of a radio signal that is reflected back to the Earth's surface from the charged layers of the ionosphere. When radio waves are transmitted, they follow two main paths: the ground wave, which travels along the surface of the Earth, and the sky wave, which rises upward and is reflected back from the ionosphere. The amount of reflection depends on frequency, daylight conditions and ionospheric density; for this reason the same transmitter can behave differently by day and by night.
This difference is pronounced in systems operating in the NDB and AM broadcast band (medium wave, MF). According to ICAO Annex 10 Volume I, NDBs operate mainly in the 190–535 kHz range. During the day, the D layer of the ionosphere largely absorbs the sky wave at these frequencies; after sunset, when the D layer weakens and disappears, the E and F layers can reflect the signal. The reflected sky wave reaches the antenna at the same time as the ground wave and causes interference.
Importance for the pilot: as a result of this interference, the ADF needle may indicate a vague, fluctuating or incorrect bearing at night; this phenomenon is called night effect. Because of night effect, the stability of the needle should be monitored during NDB-based approaches and, where possible, alternative sources such as VOR or GNSS should be used. The intensity of the effect varies with the signal path and the timing of sunset; station-specific operational information is published in the AIP of the relevant country. The sky wave is also the basis of long-distance communication in HF radio.
Often confused with
| Feature | Sky wave | Ground wave |
|---|---|---|
| Propagation path | Reflected from the ionosphere back to the Earth's surface | Travels directly along the Earth's surface |
| Night effect on NDB | Causes interference, producing bearing error | Is a stable signal source |
| Typical use | HF long-distance communication | NDB and short-range broadcasting |
What is the main cause of night effect on an NDB?
At night the D layer disappears and the E and F layers reflect the signal; the reflected sky wave interferes with the ground wave, causing fluctuation of the ADF needle.
Frequently asked questions about Sky Wave
What is the difference between a sky wave and a ground wave?
A sky wave is the component of the radio signal that is reflected back to the Earth from the ionosphere; a ground wave travels directly along the Earth's surface. At night, the sky wave from NDB signals interferes with the ground wave, causing a bearing error.
Why does the sky wave disrupt NDB bearings at night?
By day the D layer absorbs the sky wave, so the effect is small. At night, when the D layer disappears, the E and F layers reflect the signal, and the returning sky wave creates a phase difference with the ground wave, causing the ADF needle to fluctuate.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 20 Nov 2026 · Report an error: [email protected]