HF

High Frequency

ATPL Communications
IN SHORT

HF is the 3–30 MHz band; because its sky-wave signals reflected from the ionosphere can reach thousands of kilometres, it is used for long-range communication over oceans and remote areas.

What is HF?

VHF is limited to line of sight, whereas HF reaches beyond the horizon by bouncing off the ionosphere. Voice quality is poor and noisy, and the usable frequency changes because the ionosphere changes between night and day (higher frequencies by day, lower frequencies at night).

On oceanic flights, SELCAL together with HF relieves the crew of continuous listening, and this is increasingly being supplemented by CPDLC and satellite communication (SATCOM).

TEST YOURSELF

What allows HF to reach long distances?

How it is asked in the ATPL exam: 2 questions

Think about your answer, then reveal it.

1. The skip zone for HF radio transmission becomes larger when which of the following occurs?

  1. Higher frequency and higher position of the reflecting ionospheric layer
  2. Higher frequency and lower position of the reflecting ionospheric layer
  3. Lower frequency and higher position of the reflecting ionospheric layer
  4. Lower frequency and lower position of the reflecting ionospheric layer
Show answer

Correct answer: Higher frequency and higher position of the reflecting ionospheric layer

Higher frequencies and higher ionospheric layers create a larger skip zone—the area between the transmitter and the first ground-reflected signal where no reception is possible. Lower frequencies and lower layers reduce this zone.

2. Which of the following systems can be connected to the Communication Management Unit (CMU)?
1 - Flight Director
2 - FMS
3 - Multipurpose Control and Display Unit (MCDU)
4 - Communication unit (VHF, HF, Satcom)
Select the correct combination:

  1. 1, 3, 4.
  2. 2, 3.
  3. 2, 4.
  4. 2, 3, 4.
Show answer

Correct answer: 2, 3, 4.

The CMU interfaces with the FMS, MCDU, and communication units (VHF, HF, Satcom) to manage datalink and voice communications. The Flight Director is a navigation display system and does not connect to the CMU.

Solve 10 free questions from this subject →

Frequently asked questions about HF

What is the difference between HF and VHF?

VHF is limited to line of sight, whereas HF reaches beyond the horizon by bouncing off the ionosphere. HF voice quality is poor and noisy, so it is preferred for long range.

Why does the usable HF frequency change between night and day?

Because the ionosphere changes between night and day, the usable HF frequency also changes: higher frequencies are used by day and lower frequencies at night.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 21 Nov 2026 · Report an error: [email protected]