Night Effect

Turkish: Gece Etkisi

PPLATPL Radio Navigation
IN SHORT

Night effect is an ADF bearing error caused at night when the ionosphere reflects the NDB signal, so the sky wave interferes with the ground wave, producing fluctuation and bearing deviation on the ADF indicator.

What is Night Effect?

Night effect is an ADF error arising from the behaviour of low and medium frequency (LF/MF) NDB signals. Normally the ADF antenna receives the ground wave coming directly from the NDB transmitter, and this wave indicates the direction to the transmitter. At night the ionosphere becomes less ionised than during the day, so its reflective behaviour changes and part of the transmitted signal travels upward as a sky wave and is reflected back down from the ionosphere. When this reflected wave reaches the ground together with the ground wave, the two signals mix and interference occurs.

As a result of the interference, the ADF needle, instead of indicating the correct direction, fluctuates, oscillates, or drifts away from the transmitter, giving a wrong bearing. The error is usually most pronounced at night and especially during the twilight period close to sunrise and sunset. At greater distances from the transmitter the deviation can be larger, because as the ground wave weakens the relative effect of the sky wave increases. For this reason, a bearing taken from an NDB during night flight is not considered reliable if the needle is moving erratically.

The most important point for the pilot is to know that night effect is not an equipment failure and to continue monitoring the indicator. A fluctuating or constantly changing ADF indication should not be used alone for navigation decisions, especially at night and in twilight. Where necessary, verification should be made using other navigation sources and appropriate procedures, and for detailed pre-flight information the relevant AIP publications (Turkish AIP) and operator procedures should be followed.

TEST YOURSELF

What causes night effect on the ADF indicator?

Frequently asked questions about Night Effect

What is the difference between night effect and an ADF failure?

Night effect is a temporary bearing error caused by sky wave interference after the ionosphere reflects the NDB signal at night; an ADF failure originates in the equipment itself. Fluctuation of the needle at night and in twilight may indicate night effect.

When does night effect become most pronounced?

Night effect is most noticeable at night and especially during the twilight period close to sunrise and sunset. The deviation can grow as the distance from the transmitter increases.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]