Frequency
Frequency is the radio frequency used for radiotelephony communication with air traffic control, ATIS, airlines and other aviation services; it is expressed in megahertz (MHz).
What is Frequency?
Frequency is the number of oscillations per unit time of the electromagnetic waves on which radiotelephony communication takes place in aviation, and it is measured in megahertz (MHz).
Aviation radios operate in the VHF (Very High Frequency) band between 118.000 and 136.975 MHz. Every aerodrome, control tower, approach control, information service and airline has its own assigned frequencies.
The pilot communicates with the relevant station by tuning to the frequency specified in the flight plan or given by ATC. When changing frequency, the pilot confirms the new frequency, leaves the old frequency and switches to the new one.
Tuning to a wrong frequency leads to communication failure and a serious safety risk.
All frequencies are published in the AIP.
On the radio
Ankara Approach Control has asked you to contact 124.5. What is the correct order of actions?
When changing frequency the pilot confirms the new frequency, which maintains radio discipline and improves the chance of successful communication.
How it is asked in the ATPL exam: 3 questions
Think about your answer, then reveal it.
1. During flight, a pilot must disconnect the constant speed drive of an AC generator. Which conditions require this action? 1 - low oil pressure in the CSD. 2 - small frequency variation around normal operating value. 3 - high oil temperature in the CSD. 4 - large changes in voltage and kVAR output.
- 1, 3.
- 1, 4.
- 2, 3.
- 2, 4.
Show answer
Correct answer: 1, 3.
Low oil pressure and high oil temperature in the CSD indicate mechanical problems requiring immediate disconnection; slight frequency variations are normal and do not require action.
2. Which frequency band relies on reflection from the ionosphere for long-distance radio propagation in aviation?
- VLF
- UHF
- VHF
- HF
Show answer
Correct answer: HF
HF (High Frequency) waves reflect off ionosphere layers, allowing signals to travel over long distances. VHF, UHF, and VLF use different propagation methods and do not depend on ionospheric reflection.
3. You are intercepted by another aircraft. You must immediately try to establish radio contact with the intercepting aircraft or the intercept control unit. Which frequency should you use first, and what should you do if contact fails?
- 121.5 MHz. If no contact has been established, and if practicable, repeat this call on the frequency 243 MHz.
- 243 MHz. If no contact has been established, and if practicable, repeat this call on the frequency 125.5 MHz.
- 121.5 MHz. If no contact has been established, and if practicable, repeat this call on the frequency 125.5 MHz.
- 121.5 MHz. If no contact has been established, and if practicable, repeat this call on the frequency 282.8 MHz.
Show answer
Correct answer: 121.5 MHz. If no contact has been established, and if practicable, repeat this call on the frequency 243 MHz.
121.5 MHz is the international emergency frequency for civil aviation. If contact cannot be established, 243 MHz (military emergency frequency) should be used as a backup if practicable.
Frequently asked questions about Frequency
Which frequency band is used in aviation?
Aviation radios operate in the VHF band between 118.000 and 136.975 MHz. This narrow band standardises all aviation communication.
What happens if a pilot tunes to the wrong frequency?
A wrong frequency means contact with ATC cannot be established, traffic information is not received, and there is a serious risk of conflict.
How is a frequency change made?
The pilot confirms the new frequency, leaves the old frequency, switches to the new frequency and sends a "checking in" call to the new station.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 31 Oct 2026 · Report an error: [email protected]