EFIS

Electronic Flight Instrument System

PPLATPLIR Flight Instruments
IN SHORT

EFIS is an electronic flight instrument system that combines flight instrument data on digital displays and forms the basis of the glass cockpit. It replaces traditional mechanical and electromechanical instruments.

What is EFIS?

EFIS is an electronic flight instrument system that replaces traditional mechanical and electromechanical flight instruments and presents data on CRT or LCD displays. The system receives air data (altitude, airspeed, vertical speed, temperature) from the Air Data Computer (ADC), and attitude and heading data from the Attitude and Heading Reference System (AHRS/IRS). This data is processed and presented to the pilot on two main displays: the Primary Flight Display (PFD), which shows flight attitude, speed, altitude, vertical speed and heading, and the Navigation Display (ND), which shows navigation information.

The main advantage of EFIS is that it concentrates the pilot's attention on a single group of displays. Eye scan time is reduced and situational awareness is increased. The displays can also combine information from navigation systems (FMS, VOR, ILS, GNSS) on the same image, so the route, approach path and alerts can be monitored at a glance. Display modes (for example ILS, VOR, NAV, ARC) can be selected according to the pilot's needs.

An important point for pilots using EFIS is that standby instruments and related backup systems are available in the event of system failures. In the case of a display failure or data loss, the pilot must understand which information is reliable and be able to switch to backup indicators. Aircraft-specific details, the requirement for standby instruments and procedures are specified in the aircraft flight manual (AFM) and operator documentation.

Often confused with

FeatureEFISEICAS / ECAM
Main functionDisplaying flight information (PFD, ND)Displaying engine and system parameters and warnings
Typical displaysPFD and NDEngine display (EICAS) or system status display (ECAM)
TEST YOURSELF

In an EFIS system, which display primarily shows attitude, airspeed, altitude and heading?

How it is asked in the ATPL exam: 3 questions

Think about your answer, then reveal it.

1. On a Boeing 737-400, when you start the Electronic Flight Instrument System and access the Flight Management Computer/Control Display Unit (FMC/CDU), the first three pages you normally see in order are _____.

  1. IDENT - RTE - DEPARTURE
  2. IDENT - POS INIT - RTE
  3. POS INIT - RTE - DEPARTURE
  4. POS INIT - RTE - IDENT
Show answer

Correct answer: IDENT - POS INIT - RTE

The standard startup sequence for the B737-400 FMC/CDU is IDENT (aircraft identification), POS INIT (position initialization), and RTE (route entry), in that order.

2. On an EFIS display, when showing weather radar returns, precipitation intensity is shown using a colour sequence. Which sequence is correct according to JAR-25?

  1. green, red, magenta, black
  2. black, amber/yellow, magenta, red
  3. amber/yellow, magenta, black
  4. green, amber/yellow, red, magenta
Show answer

Correct answer: green, amber/yellow, red, magenta

The standard colour progression for increasing precipitation intensity follows: green (light), amber/yellow (moderate), red (heavy), and magenta (very heavy or hail).

3. Which of the following parameters are displayed on the Primary Flight Display (PFD) of an EFIS-equipped aircraft?

  1. attitude, heading, altitude, systems information.
  2. IAS, attitude, altitude, heading.
  3. attitude, heading, IAS, navigation map in Plan layout mode.
  4. altitude, attitude, heading, engine parameters.
Show answer

Correct answer: IAS, attitude, altitude, heading.

The PFD presents the core flight parameters needed for aircraft control: airspeed (IAS), attitude (pitch and roll), altitude, and heading.

Solve 10 free questions from this subject →

Frequently asked questions about EFIS

What is the difference between the PFD and the ND in EFIS?

In EFIS, the Primary Flight Display (PFD) shows attitude, speed, altitude, vertical speed and heading. The Navigation Display (ND) presents navigation information.

What should a pilot do if EFIS fails?

In the event of a display failure or data loss, the pilot must understand which information is reliable and be able to switch to backup indicators. The requirement for standby instruments is specified in the AFM and operator documentation.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 16 Nov 2026 · Report an error: [email protected]