PFD

Primary Flight Display

PPLATPL Flight Instruments
IN SHORT

The PFD is the primary flight display in a glass cockpit that combines the artificial horizon, speed and altitude tapes, vertical speed, heading and automatic flight modes on a single screen.

What is PFD?

The PFD combines the classic "six-pack" flight instruments (T layout): the attitude indicator in the centre, the airspeed tape (V-speeds and trend vector) on the left, the altitude tape and VSI on the right, and the HSI/heading at the bottom. At the top, the FMA (flight mode annunciator) shows the autopilot and autothrottle modes.

Data comes from the AHRS (attitude/heading) and ADC (air data) units. GA systems such as the Garmin G1000 also have a PFD and an MFD (multifunction display). If the PFD fails, the standby instruments are used.

TEST YOURSELF

What does the FMA on the PFD show?

Frequently asked questions about PFD

Where does the PFD get its data?

The PFD receives its data from the AHRS (attitude and heading) and ADC (air data) units. This is how the horizon, airspeed, altitude and heading information on the screen is produced.

What does a pilot do if the PFD fails?

If the PFD fails, the standby instruments are used. The pilot continues the flight using these backup indicators.

How are the PFD and MFD used together?

In general aviation systems such as the Garmin G1000, a PFD and an MFD (multifunction display) are installed together. The PFD shows the primary flight information, while the MFD shows additional multifunction information.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 5 Nov 2026 · Report an error: [email protected]