BREAK

PPLATPLIR Communications
IN SHORT

BREAK is the standard radiotelephony procedure word used to separate sentences or blocks of information in long radio messages.

What is BREAK?

BREAK is a word spoken in radio communication between pilot and ATC to make long or complex messages clear. By clearly separating the different parts of a message, it helps the receiver understand and process the information better.

BREAK is generally used when giving a flight plan, reading NOTAMs, passing technical information, or presenting coordinates or numerical data. For example, when a pilot sends a long message to ATC, they say "BREAK" at the end of each logical part to indicate to the receiver that a new topic is starting.

This procedure is the standard communication technique defined in ICAO Annex 10 and Doc 4444. Because there are no visual cues on radio, spoken markers are critical for showing the structure of a message. Using BREAK prevents misunderstandings, especially in noisy environments or under weak signal conditions.

On the radio

PILOT Istanbul Approach, Cessna TC-ABC, flight level 3500, estimating Istanbul in 15 minutes, BREAK, requesting descent to 2500 feet, BREAK, souls on board 4, fuel remaining 1 hour 30 minutes.
APP Cessna TC-ABC, roger, descend to 2500 feet, expect approach clearance in 10 minutes.
TEST YOURSELF

When sending a long message to ATC, a pilot says BREAK at the end of each logical part. What is the purpose of this?

Frequently asked questions about BREAK

When is BREAK used?

BREAK is used between each logical part of long messages, such as giving a flight plan, reading NOTAMs, passing technical information, or presenting coordinates or numerical data.

How does using BREAK prevent misunderstanding?

Because there are no visual cues on radio, BREAK shows the structure of the message and signals that a new topic is starting. It is especially important in noisy environments or under weak signal conditions.

Is BREAK a standard procedure?

Yes. BREAK is a standard communication technique defined in ICAO Annex 10 and Doc 4444.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 19 Nov 2026 · Report an error: [email protected]