Gradiente de descida

Turco: İniş Gradyanı

PPLATPLIR Navegação
IN SHORT

Descent gradient is the ratio of height lost by an aircraft to the horizontal distance covered; it is used on approach plates and in CDA calculations.

What is Descent gradient?

Descent gradient is a ratio showing how much height an aircraft loses within a given horizontal distance. It is expressed as a percentage (%) or as feet per nautical mile (ft/NM). For example, a 3% gradient means a loss of 3 feet of height for every 100 feet of horizontal distance; 300 ft/NM means a descent of 300 feet per nautical mile.

On approach plates, particularly for non-precision approaches and Continuous Descent Approach (CDA) procedures, it is used by pilots and ATC to plan a safe and efficient descent profile. It is critical for meeting obstacle clearance and stabilised approach criteria.

When determining the TOD (Top of Descent) point during flight planning, the pilot calculates the required descent gradient using the height difference and the distance from cruise level to the destination aerodrome. In flight, the actual gradient is checked using the descent rate (ft/min) and ground speed.

Exemplo

On an approach plate: "Maintain 3% descent gradient to 1500 ft AAL."

Calculation example: You will descend from FL350 (35,000 ft) to 5,000 ft, with a distance of 100 NM to the destination.
Height difference: 35,000 - 5,000 = 30,000 ft
Gradient: 30,000 ft ÷ 100 NM = 300 ft/NM (3%)

Radio: "Descend via STAR, maintain 3 percent descent gradient."
TEST YOURSELF

An approach plate states "Maintain 300 ft/NM descent gradient". What is this in percentage?

Frequently asked questions about Descent gradient

How is descent gradient calculated?

Descent gradient is found by dividing the height difference by the horizontal distance; for example, descending from 35,000 ft to 5,000 ft over 100 NM gives a height difference of 30,000 ft and a gradient of 300 ft/NM.

How is descent gradient used to determine the TOD point?

The pilot calculates the required descent gradient using the distance and height difference from cruise level to the destination aerodrome when determining the TOD (Top of Descent) point.

How is the actual descent gradient checked in flight?

In flight, the actual gradient is checked using the descent rate (ft/min) and ground speed.

Traduzido por máquina (IA) a partir do nosso Turkish glossary entry usando a terminologia ICAO/EASA. Atualizado em 19 nov 2026 · Relatar um erro: [email protected]