How to Prepare a NavLog?
| WAYPOINT | WIND | COURSE | GS | DIST | ETE | FUEL | |||
|---|---|---|---|---|---|---|---|---|---|
| ALT 7500 | DIR | KT | MC | WCA | MH | KT | NM | MIN | LT |
| ALIFUATPAŞA | 180 | 12 | 055 | +6 | 061 | 107 | 6.7 | 4 | 1.9 |
| ADLİYE | 200 | 15 | 013 | -1 | 012 | 116 | 4.3 | 2 | 1.1 |
| AKYAZI | 200 | 13 | 078 | +6 | 084 | 107 | 13.2 | 7 | 3.7 |
| KARASU | 210 | 14 | 001 | -4 | 357 | 113 | 28.5 | 15 | 7.6 |
| AKÇAKOCA | 210 | 9 | 087 | +4 | 091 | 106 | 19.5 | 11 | 5.5 |
What is a NavLog?
NavLog (navigation log) is the flight log that brings together navigation and performance information for each route leg in VFR flight planning. Known in English as the "navigation log", it collects the waypoint sequence, magnetic course, wind, speed, flight time and fuel planning from departure to arrival in a single table.
It is also used in flight: the actual time over each turning point is recorded and compared with the plan. In the PPL navigation exam and cross-country flight briefing, it is expected that the NavLog calculation can be done by hand.
What Do the NavLog Columns Mean?
How to Prepare a NavLog Step by Step?
The same chain works in the exam and behind the programme: route → altitude → wind → heading → speed → time → fuel.
- Draw the route, measure the true track (TC) and distanceCombine the departure, turning points and arrival on the chart. Measure the direction of each leg relative to geographic north (True Course) with a plotter, and its length in nautical miles (NM).
- Select cruising altitudeConsider terrain and obstacles (MSA), airspace limits and the semicircular rule: in VFR, if the magnetic track is 000–179°, use odd thousands + 500 ft; if 180–359°, use even thousands + 500 ft.
- Determine the wind and TASObtain the forecast wind (direction/speed) at the selected altitude. Convert the aircraft's cruise IAS to true airspeed (TAS) according to altitude and temperature.
- Find the wind correction angle (WCA)Crosswind component = wind speed × sin(angle between wind and route); WCA ≈ arcsin(crosswind ÷ TAS). Turn the nose towards the side the wind is coming from: True Heading (TH) = TC ± WCA.
- Convert to Magnetic Heading (MH)Apply magnetic variation: easterly variation is subtracted, westerly variation is added (East is least, West is best). If a compass deviation card is available, find the deviation and the compass heading (CH).
- Calculate the groundspeed (GS)GS = √(TAS² − crosswind²) − headwind component (added for a tailwind). In practice, an E6B, flight computer or NavLog programme is used.
- Calculate the time (ETE) and fuelETE (minutes) = distance ÷ GS × 60. Leg fuel = ETE (hours) × hourly consumption. Add taxi, contingency, alternate and legal reserve (for daytime VFR, usually 30 minutes, EASA NCO.OP.125).
- Check during the flight with ETA/ATARecord the actual time over each turning point (ATA), compare it with the plan; if there is a deviation, update the heading, time and fuel.
Single-Leg NavLog with the Wind Triangle
Cessna 172, a 44 NM leg. The wind is blowing from 60° left of the route; therefore the nose is turned 10° left and groundspeed decreases.
| True track (TC) | 090° |
|---|---|
| Wind | 030° / 20 kt |
| TAS | 100 kt |
| Crosswind / headwind | 17 kt / 10 kt |
| WCA | 10° L → TH 080° |
| Magnetic variation | 5° E → MH 075° |
| Ground speed (GS) | ≈ 88 kt |
| Distance | 44 NM |
| Time (ETE) | ≈ 30 min |
| Fuel (9 GPH) | ≈ 4,5 gal |
crosswind = 20 × sin 60° ≈ 17 kt
WCA = asin(17 ÷ 100) ≈ 10°
headwind = 20 × cos 60° = 10 kt
GS = √(100² − 17²) − 10 ≈ 88 kt
ETE = 44 ÷ 88 × 60 ≈ 30 min
fuel = 0.5 h × 9 GPH ≈ 4.5 gal
To see the effect of wind live crosswind simulation, for speed conversions IAS · TAS · GS simulation you can use.
What Information Is Transferred from METAR and TAF to NavLog?
Half of the NavLog is weather. In the training example below, see where each colour goes in the NavLog.
Sample reports are for training purposes. For real METAR/TAF, METAR/TAF lookup tool, for the full list of codes METAR/TAF reading guide .
- 03008KTSurface wind, not NavLog wind. Measured at the aerodrome relative to true north; used for the take-off runway and crosswind. At cruising altitude the wind is usually stronger and changes direction.
- SCT045 BKN100Sets the cruising altitude. Ceiling 10,000 ft; a 7,500 ft cruise altitude leaves enough vertical separation below the cloud. If the ceiling lowers, reassess the altitude (and MSA).
- 15/04OAT and TAS calculation. With standard lapse rate (≈2 °C/1000 ft), approx. +1 °C at 7,500 ft; TAS is calculated with this temperature. The difference between temperature and dew point (11 °C) indicates a cumulus base of approx. 4,400 ft.
- Q1018Altimeter setting. Cruise altitudes and MSA are referenced to QNH; enter them on the altimeter before take-off.
- BECMG / TEMPODeparture time and alternate plan. In the afternoon the wind veers to 210°: headwind/tailwind components change on the return legs, so the NavLog must be calculated according to departure time. 15–18Z showers and a 2,000 ft ceiling require a diversion aerodrome and contingency fuel.
Sample NavLog: Pamukova → Akçakoca
A five-leg cross-country flight from the training aerodrome in Sakarya to the Black Sea coast. Values calculated with the NavLog programme formula: IAS 90 kt, 7,500 ft, OAT +1 °C, 30 L/hour; since the magnetic course is to the east (000–179°), odd thousands + 500 ft.
| WAYPOINT | ALT | MSA | WIND | COURSE | SPEED | DIST | ETE | FUEL | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| POVA → | FT | FT | DIR | KT | MC | WCA | MH | TAS | GS | NM | MIN | LT |
| ALIFUATPAŞA | 7500 | 5300 | 180 | 12 | 055 | +6 | 061 | 101 | 107 | 6.7 | 4 | 1.9 |
| ADLİYE | 7500 | 5600 | 200 | 15 | 013 | -1 | 012 | 101 | 116 | 4.3 | 2 | 1.1 |
| AKYAZI | 7500 | 6400 | 200 | 13 | 078 | +6 | 084 | 101 | 107 | 13.2 | 7 | 3.7 |
| KARASU | 7500 | 6300 | 210 | 14 | 001 | -4 | 357 | 101 | 113 | 28.5 | 15 | 7.6 |
| AKÇAKOCA | 7500 | 4500 | 210 | 9 | 087 | +4 | 091 | 101 | 106 | 19.5 | 11 | 5.5 |
| TOTAL | 72.2 | 39 | 19.8 | |||||||||
As the wind blows from the south, there is a tailwind on the Karasu leg (northbound, MC 001°): TAS 101 kt gives GS 113 kt. Because the nose turns towards the side the wind comes from, the WCA signs change depending on the leg.
Fuel Table
Conclusions from This Example
- 7,500 ft, above the highest MSA (6,400 ft).
- Trip fuel is only 20 L; most of the required fuel is reserve and contingency.
- On the return leg the wind is a headwind: calculate time and fuel separately.
Prepare the Same NavLog in 2 Minutes with the Programme
All the calculations above are done automatically by the programme. You enter the route; MC, distance, MSA, wind, temperature, heading, time and fuel are filled in.
Paste Route
ICAO codes, waypoint names, coordinates (4100N03000E) or SkyVector route; rows are generated in one go.
MC, Distance and MSA Automatic
Magnetic course and distance from coordinates; suggested MSA from the highest terrain within the 5 NM corridor of the leg.
Wind and Temperature Automatic
When you press "Calculate", the wind and OAT for each leg are filled in from the forecast at that altitude for your departure time.
Live Route Map
As you add waypoints the route is drawn on the map; you see the wrong point immediately.
Automatic METAR/TAF
In the detailed format, the current METAR and TAF for the departure and destination aerodromes are added to the NavLog.
Fuel Table and Diversion
Trip, taxi, contingency, alternate and reserve; litres or USG, depending on aircraft type.
Route Weather ProfileNEW
Along your route, cloud base, icing, turbulence and vertical section; recommended altitudes are written in the table.
PDF, Save and Share
Classic A5 or detailed A4 PDF, return route with one click, saved NavLogs and NavLogs shared with your school.
NavLog in 5 Steps
- Choose a formatClassic (A5 portrait, litres) or Detailed (A4 landscape, Cessna 172 school format).
- Enter the departure aerodrome and routePaste the route or type the waypoints one by one; select from the suggestions list.
- Check altitude and IASBlank altitudes are filled with the most commonly used altitude at that point; watch the warning for below MSA.
- Press CalculateWind, temperature, heading, GS, ETE, ETA and fuel table is generated.
- Get the weather briefing and download the PDFCheck the route with the Route Weather Profile, and print the NavLog and briefing PDF.
| Classic NavLog | Detailed NavLog | |
|---|---|---|
| Output | A5 vertical | A4 landscape PDF |
| Line structure | Waypoint row | From → To leg, TOC/TOD |
| Heading chain | MC → WCA → MH | TC → TH → MH |
| Temperature | OAT | OAT + ISA± |
| Fuel | Litres | Litres or USG |
| METAR/TAF | Automatic | |
| Paste route · MSA | ||
| Suitable for whom? | Quick cross-country plan, exam practice | School format, check flight briefing |
Route Weather Profile: Weather Briefing for Your NavLog
After "Calculate", your NavLog is compared with the weather forecast along the route: which leg has cloud, icing or turbulence, and which altitude and departure time are better.
- Cloud base, precipitation, icing and turbulence per leg
- VFR suitability assessment and best departure time
- Altitude suggestion per leg; MSA below warning
- Map layers: cloud base, precipitation, wind, turbulence, icing, SIGMET
- Write suggested altitudes into the NavLog table with one key
- Cross-section and 6-weather-chart briefing PDF
Frequently Asked Questions
The questions student pilots ask most when preparing a NavLog.
What is a NavLog?
NavLog (navigation log), is the table used to plan together and track in flight the route, altitude, wind correction, heading, groundspeed, time and fuel information for each leg of a VFR flight.
What Is the Most Common Error in the NavLog?
Applying the wind correction in the wrong direction and mixing up the sign of magnetic variation. The nose is always turned towards the side the wind comes from; easterly variation is subtracted, westerly variation is added. Another common mistake is using the METAR wind (at surface, relative to true north) instead of the cruise altitude wind.
Is the METAR Wind Used in the NavLog?
Not used directly. METAR wind is measured at the aerodrome, 10 metres above ground; it is important for the runway in use and crosswind. The NavLog uses forecast wind at cruising altitude (winds aloft); wind aloft is generally stronger and veers to the right. The Son Yaklaşma NavLog programme automatically fills in the wind and temperature for each leg according to departure time.
What Is a NavLog Preparation Programme?
The NavLog preparation programme is a navigation tool that automatically prepares the route legs, wind correction, magnetic heading, time and fuel calculations in a single table. The Son Yaklaşma NavLog Preparation Programme offers this in Turkish and free of charge; it provides PDFs in Classic (A5) and Detailed (A4, Cessna 172) formats.
Is the NavLog Programme Free?
Yes. With a free membership you can make a set number of calculations each day, save your NavLogs and download them as PDF. Route pasting, automatic MSA, live route map and the Route Weather Profile are also free for members.
What does the detailed NavLog (Cessna 172) include?
Leg-based (From-To) route, TOC/TOD legs, True Course → deviation → True Heading → Magnetic Heading chain, OAT and ISA deviation, litre or USG fuel depending on aircraft type, fuel table and diversion calculation, current METAR/TAF for departure/arrival aerodrome, and A4 landscape PDF output.
Does the NavLog Replace the Official Flight Briefing?
No. NavLog is a training aid for planning. Before flight, current AIP, NOTAM, meteorology, aerodrome and airspace information must be verified from official sources.
Prepare Your First NavLog Now
With a free membership, paste your route, calculate, check the weather profile and print the PDF.
NavLog is a training and planning tool. Verify with the current AIP, NOTAMs, METAR/TAF and the official meteorological briefing before flight.