VMCA
Minimum Control Speed in Air
VMCA is the minimum airspeed at which a multi-engine aeroplane remains controllable after an engine failure.
What is VMCA?
Minimum Control Speed in Air (VMCA) is the minimum airspeed required for a multi-engine aeroplane to remain controllable and to maintain its flight path after failure of the critical engine (usually the engine producing the most thrust). At this speed, the aerodynamic control surfaces are effective enough to counter the yawing moment created by the failed engine using the thrust of the remaining engines.
VMCA varies with aircraft type, weight, centre of gravity position, wing configuration (flap setting) and air density. Different conditions have different VMCA values, which are given in the Aeroplane Flight Manual (AFM) or Pilot's Operating Handbook (POH) and the aircraft performance data. VMCA is especially critical during take-off and climb, because the aeroplane operates at low altitude and with limited performance margin during these phases.
Below VMCA, the aeroplane tends to yaw towards the failed engine side and the pilot cannot control it; this may lead to a spin or loss of controlled flight. Pilots of multi-engine aeroplanes learn in engine failure procedures to keep speed above VMCA and to increase speed if necessary. VMCA is an important member of the V-speed family and determines take-off and climb safety in performance calculations.
Example
On a multi-engine aeroplane, VMCA is stated as 40 knots. If a critical engine failure occurs at 38 knots during take-off, what should the pilot do?
Below VMCA the aeroplane becomes uncontrollable. The pilot must either increase speed above VMCA or land safely. Since 38 knots is less than 40 knots, a landing must be made.
How it is asked in the ATPL exam: 2 questions
Think about your answer, then reveal it.
1. How does VMCA (minimum control speed in the air) change when pressure altitude increases?
- VMCA is not affected by pressure altitude
- VMCA decreases with increasing pressure altitude.
- VMCA decreases with pressure altitude higher than 4000 ft.
- VMCA increases with increasing pressure altitude.
Show answer
Correct answer: VMCA decreases with increasing pressure altitude.
At higher pressure altitudes, air density is lower, so the aircraft must fly faster to generate the same aerodynamic forces needed for directional control with one engine inoperative; therefore VMCA decreases with altitude because true airspeed increases relative to indicated airspeed.
2. Why is VMCA measured with a maximum bank angle of 5° towards the operating engine?
- at 5° bank (live engine low), sideslip is zero.
- the slip indicator at 5° bank (live engine low) is centred.
- more than 5° bank (live engine low) would not reduce VMCA.
- although more bank reduces VMCA, too much bank may lead to fin stall.
Show answer
Correct answer: although more bank reduces VMCA, too much bank may lead to fin stall.
Although increased bank angle reduces VMCA, banking more than 5° towards the live engine risks causing the vertical stabilizer to stall, which would prevent further control of the aircraft.
Frequently asked questions about VMCA
Why does the aeroplane become uncontrollable below VMCA?
Below VMCA, the aeroplane tends to yaw towards the failed engine side and the pilot cannot control it. This may lead to a spin or loss of controlled flight.
Why is VMCA important during take-off and climb?
VMCA is especially critical during take-off and climb because the aeroplane operates at low altitude and with limited performance margin during these phases.
What does the VMCA value depend on?
VMCA varies with aircraft type, weight, centre of gravity position, wing configuration (flap setting) and air density. Values for different conditions are given in the AFM/POH.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 18 Nov 2026 · Report an error: [email protected]