Critical engine
Turkish: Kritik Motor
The critical engine is the engine whose failure most adversely affects the aeroplane's performance and controllability. It forms the basis of performance calculations for multi-engine aeroplanes.
What is Critical engine?
The critical engine (Kritik Motor) is, on a multi-engine aeroplane, the engine whose failure has the most adverse effect on the aeroplane's performance and controllability when one engine fails. Its failure is defined as the engine whose loss, together with the asymmetric thrust from the remaining engines, produces the greatest increase in rolling and yawing moments. Which engine is critical depends on the aeroplane's design, the position of the engines and propellers, and the direction of rotation; this information is given in the aeroplane flight manual (AFM/POH).
In performance calculations, the critical engine is the reference for calculations based on the one engine inoperative (OEI) condition. When assessing take-off, climb and en-route performance, the critical engine failure scenario is used as the worst case, so the results obtained include a safety margin. Quantities such as climb gradient and obstacle clearance margin are calculated on the basis of this scenario.
For the pilot, the importance of the critical engine lies in knowing the force, rudder and aileron inputs required to control the aeroplane during a critical engine failure, and the minimum control speed (VMC). The critical engine concept is essential knowledge for planning safe single-engine performance and for applying the correct procedure during an engine failure.
On a multi-engine aeroplane, what is the critical engine?
The critical engine is the engine whose failure most degrades performance and controllability. Which engine is critical depends on the aeroplane's design.
Frequently asked questions about Critical engine
What is the difference between the critical engine and OEI?
The critical engine is the engine whose failure has the most adverse effect on performance. OEI is a general operating condition describing a situation in which one engine is not operating; in performance calculations, the critical engine failure is used as the worst case of this condition.
How is the critical engine used in performance calculations?
The critical engine is used as the reference for take-off, climb and en-route performance calculations based on the one engine inoperative condition. Results obtained in this scenario include a safety margin.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]