Ground Wave
Turkish: Yer Dalgası
The ground wave is the component of a radio wave that travels along the surface of the Earth, following the curvature of the ground. It is the reliable main component of the NDB signal.
What is Ground Wave?
The ground wave is the component of a radio wave leaving a transmitter antenna that travels along the Earth's surface while interacting with the land or sea surface. At low and medium frequencies (LF/MF) this component is dominant, and the wave can extend beyond the horizon by following the curvature of the Earth. The range of propagation depends on the conductivity and dielectric properties of the surface. Over highly conductive surfaces such as sea water, the ground wave reaches further than over dry or rocky ground.
In radio navigation, NDB (Non-Directional Beacon) systems use the ground wave to determine the direction for the ADF receiver. Because the ground wave provides a relatively stable and predictable signal by day and by night, it is the most reliable component of the NDB. Range depends on transmitter power, frequency and ground conductivity, and the usable limits are published in the AIP of the relevant state. The ICAO specifications for NDB are contained in ICAO Annex 10 Volume I.
The key distinction for pilots emerges when the ground wave is compared with the sky wave. When the nocturnal D layer weakens, the sky wave can mix with the MF signal, which can cause night-time deviations and bearing errors on the ADF indicator. The ground wave is largely protected from this night effect. NDB readings outside the service volume, however, are not considered reliable.
Often confused with
| Feature | Ground Wave | Sky Wave |
|---|---|---|
| Propagation path | Follows the Earth's surface | Reflected from the ionosphere |
| Night stability | Relatively stable | Can cause deviations on NDB at night |
| Main use | NDB/ADF signal | Long-range HF communication |
Which type of propagation, reflected from the ionosphere, can cause a night-time bearing error on an NDB signal?
The sky wave can mix with the MF signal when the nocturnal D layer weakens; the ground wave is largely protected from this effect.
Frequently asked questions about Ground Wave
What is the difference between the ground wave and the sky wave?
The ground wave travels along the Earth's surface, while the sky wave is reflected from the ionosphere. For NDB, the reliable main component is the ground wave, whereas the sky wave at night can cause bearing errors.
Why does the NDB signal travel as a ground wave?
The ground wave is the main component because NDB uses low and medium frequency (LF/MF) signals, which travel along the Earth's surface. Its range depends on frequency, transmitter power and ground conductivity.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 20 Nov 2026 · Report an error: [email protected]