Multipath

Turkish: Çoklu Yol Yayılımı

PPLATPLIR Radio Navigation
IN SHORT

Multipath is the arrival of a radio signal at the receiver by more than one route, because the signal is reflected from surfaces, and it causes errors in ILS and GNSS measurements.

What is Multipath?

Multipath is the phenomenon in which a radio wave reaches the receiver not only by the direct path from the transmitter but also after being reflected from surfaces such as buildings, hills, hangars, vehicles or the aircraft's own fuselage. When reflected waves arrive at the receiver at the same time as the direct wave, but with different phase and amplitude, they interfere with it, and the receiver misinterprets the combined signal.

This is particularly noticeable in ILS. The localiser (LLZ) and glide slope (GS) signals are distorted by reflections from surfaces around the runway; as a result the course or glide path deviates from the true axis and indications on the instruments may fluctuate. Because the source of reflection changes with the aircraft and with movements in the surroundings, the error behaves like variable noise rather than a fixed offset. Similarly, in GNSS receivers a reflected satellite signal can cause a position error.

Relevance for the pilot: if sudden and apparently erratic deviations are observed on the instruments during an approach, this may be an indication of multipath. The tolerances permitted for signal quality are defined in ICAO Annex 10 and the relevant AIP publications; when the pilot has doubts, they should report to ATC. Movement restrictions in critical and sensitive areas are applied by the facility operator to reduce this distortion.

TEST YOURSELF

Which of the following is the typical effect of multipath on the ILS?

Frequently asked questions about Multipath

How does multipath affect the ILS?

Multipath causes the ILS localiser and glide slope signals to interfere with reflected copies from surfaces such as buildings, vehicles or aircraft, producing fluctuation or deviation on the course and glide path indications.

What is the difference between multipath and signal loss?

With multipath the signal is received but is distorted by reflected copies; with signal loss the transmission is completely interrupted. Multipath therefore gives a misleading but received deviation, whereas signal loss appears on the indicator as a flag or interruption.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]