Эшелон перехода

Турецкий: Geçiş Seviyesi

PPLATPL Воздушное право
IN SHORT

The transition level (TL) is the lowest flight level available for use above the transition altitude; when descending, the altimeter is reset to QNH at this level.

Что такое переходный эшелон?

The TL varies with QNH: as pressure falls, the same flight level lies lower, so the TL is raised to keep the transition layer protected. ATC or ATIS broadcasts the current TL (e.g. "transition level 130").

When descending, the altimeter is set to QNH as the TL is passed, or when a descent clearance from a level to an altitude is received, and altitude is then reported in feet (altitude). The TL is one of the items that must be included in the ATIS and that is read back when descent clearances are given.

По радио

Example: If the TL is published as 3000 ft in the Istanbul Airport AIP, after take-off, when the pilot reaches 3000 ft, the altimeter is changed from QNH to the FL indication (1013.25 hPa) and reporting begins as "FL030". When descending below 3000 ft during the approach, the pilot returns to QNH and reports altitude such as "2800 ft".
Радиотелефония:
PILOT Istanbul Approach, TC-ABC, FL040, Transition Level 3000 ft.
TOWER TC-ABC, roger, FL040 acknowledged.

Часто путают с

КонцепцияОпределениеУстановка высотомера
Transition Level (TL)The level at which pilots and ATC change from QNH to FLFL above the TL (1013.25 hPa)
Transition Altitude (TA)The area below the TL where altitudes are reported using QNHQNH below the TA (actual pressure)
Эшелон полёта (FL)The altitude shown using standard pressure (1013.25 hPa) above the TLFL indication (fixed 1013.25 hPa)
TEST YOURSELF

What happens to the transition level when QNH falls?

Frequently asked questions about Transition Level

When is the altimeter set to QNH during descent?

During descent, the altimeter is set to QNH when passing the transition level, or when a descent clearance from a level to an altitude is received. From that point, altitude is reported in feet (altitude).

Why is the transition level information broadcast in the ATIS?

The transition level is one of the items included in the ATIS and read back when descent clearances are given. ATC or ATIS broadcasts the current TL value so the pilot makes the correct altimeter setting.

What is the relationship between the transition level and QNH?

The transition level varies with QNH. As pressure falls, the same flight level lies lower, so the TL is raised to keep the transition layer protected.

Машинный перевод (ИИ) с нашего Turkish glossary entry по терминологии ICAO/EASA. Обновлено 21 2026 · Сообщить об ошибке: [email protected]