Превышение ВПП

RWY ELEV = Runway Elevation

PPLATPLIR Планирование полёта
IN SHORT

Превышение ВПП — это высота порога ВПП над уровнем средней воды океана. Используется в расчётах летных характеристик и при определении высоты по плотности.

Что такое превышение ВПП?

Runway Elevation (RWY ELEV) is the vertical distance of an aerodrome's runway above mean sea level. In aviation it is also known as the aerodrome elevation, and it is usually expressed in feet. The runway elevation of every aerodrome is clearly stated in the AIP (Aeronautical Information Publication) and on approach plates.

Runway elevation is a critical parameter in aircraft performance calculations. Aerodromes at high elevation (for example La Paz and Bogotá) have lower air density, which adversely affects take-off and landing performance. When calculating the maximum take-off mass, the required runway length and the climb performance, the pilot must correct for runway elevation using the AFM (Aircraft Flight Manual) data.

Runway elevation is also the basic input for the density altitude calculation. Density altitude = Pressure altitude + (Temperature deviation × 120 ft/°C), and pressure altitude starts from the runway elevation. During flight planning, the pilot should check the runway elevation from the AIP and adjust the performance data accordingly.

Пример

In the AIP for LTAC (Ankara Esenboga): RWY ELEV 3988 ft. The pilot corrects the take-off performance table for this elevation. If the temperature is 25°C, the density altitude is approximately 5500 ft, and this value is used in the take-off distance calculation.

Часто путают с

Превышение ВППБарометрическая высотаВысота по плотности
Высота порога ВПП над средним уровнем моряВысота, получаемая при установке QNH относительно превышения ВППPressure altitude corrected for temperature effects
FIXED, stated in the AIPМеняется при изменении давленияЗависит от температуры и давления, переменная величина
E.g. 3988 ftE.g. 4100 ft (QNH 1013 hPa)E.g. 5500 ft (hot day)
TEST YOURSELF

The runway elevation at Ankara Esenboga (LTAC) is 3988 ft, the outside air temperature is 28°C and QNH is 1013 hPa. What is the approximate density altitude in feet?

Frequently asked questions about Runway Elevation

How does runway elevation affect density altitude?

Runway elevation is the basic input for the density altitude calculation. Density altitude is the sum of pressure altitude and temperature deviation × 120 ft/°C, and pressure altitude starts from the runway elevation.

Where is runway elevation information found?

Runway elevation is clearly stated in the AIP and on approach plates. During flight planning the pilot should check this value in the AIP and adjust the performance data accordingly.

Why do high-elevation aerodromes require demanding performance?

At high-elevation aerodromes the air density is low, which adversely affects take-off and landing performance. The pilot must calculate the maximum take-off mass and the required runway length using the AFM data.

Машинный перевод (ИИ) с нашего Turkish glossary entry по терминологии ICAO/EASA. Обновлено 20 2026 · Сообщить об ошибке: [email protected]