LEMAC

Leading Edge of Mean Aerodynamic Chord

PPLATPL Masse et centrage
IN SHORT

LEMAC (Leading Edge of Mean Aerodynamic Chord) est la distance du bord d'attaque de la corde aérodynamique moyenne par rapport au point de référence. C'est le point de départ de référence pour le calcul du pourcentage de CG.

Qu'est-ce que le LEMAC ?

LEMAC (Leading Edge of Mean Aerodynamic Chord) is the distance of the leading edge of the mean aerodynamic chord (MAC) from the aircraft's datum point. It is usually given as a station value, measured in inches or centimetres from the datum towards the nose. The MAC is an imaginary chord that represents the aerodynamic effect of the wing on a single chord; this chord is used as the reference for expressing the position of the centre of gravity (CG) as a percentage.

The formula for the CG percentage is: CG % MAC = ((CG position - LEMAC) / MAC length) x 100. The CG position and LEMAC must be measured in the same reference system, i.e. from the same datum; otherwise the result will be wrong. The LEMAC value is specific to the aircraft type and is published in approved documents such as the Weight and Balance Manual; the pilot is not expected to estimate this value.

The practical importance for the pilot is to verify that the centre of gravity remains within the permitted CG envelope. If the CG is very close to the leading edge of the MAC, the aircraft may become longitudinally unstable (CG too far forward); if it is close to the aft limit, it may be dangerous in terms of controllability and stall behaviour. In exam questions, LEMAC is usually given as the starting point of the MAC, and the CG percentage is calculated from this value.

Exemple

Given: LEMAC from datum = 300 in, MAC = 80 in, CG = 340 in.
CG % MAC = ((340 - 300) / 80) x 100 = 50%
TEST YOURSELF

Que représente LEMAC ?

Frequently asked questions about LEMAC

How is the CG percentage calculated?

It is calculated with the formula CG % MAC = ((CG position - LEMAC) / MAC length) x 100. The CG position and LEMAC must be measured from the same datum; otherwise the result will be wrong.

Where is the LEMAC value found?

LEMAC is specific to the aircraft type and is published in approved documents such as the Weight and Balance Manual. The pilot is not expected to estimate this value.

Traduit automatiquement (IA) à partir de notre Turkish glossary entry utilisant la terminologie OACI/EASA. Mis à jour le 20 nov. 2026 · Signaler une erreur : [email protected]