LEMAC
Leading Edge of Mean Aerodynamic Chord
LEMAC (Leading Edge of Mean Aerodynamic Chord) is the distance of the leading edge of the mean aerodynamic chord from the datum point. It is the reference starting point for calculating the CG percentage.
What is LEMAC?
LEMAC (Leading Edge of Mean Aerodynamic Chord) is the distance of the leading edge of the mean aerodynamic chord (MAC) from the aircraft's datum point. It is usually given as a station value, measured in inches or centimetres from the datum towards the nose. The MAC is an imaginary chord that represents the aerodynamic effect of the wing on a single chord; this chord is used as the reference for expressing the position of the centre of gravity (CG) as a percentage.
The formula for the CG percentage is: CG % MAC = ((CG position - LEMAC) / MAC length) x 100. The CG position and LEMAC must be measured in the same reference system, i.e. from the same datum; otherwise the result will be wrong. The LEMAC value is specific to the aircraft type and is published in approved documents such as the Weight and Balance Manual; the pilot is not expected to estimate this value.
The practical importance for the pilot is to verify that the centre of gravity remains within the permitted CG envelope. If the CG is very close to the leading edge of the MAC, the aircraft may become longitudinally unstable (CG too far forward); if it is close to the aft limit, it may be dangerous in terms of controllability and stall behaviour. In exam questions, LEMAC is usually given as the starting point of the MAC, and the CG percentage is calculated from this value.
Example
CG % MAC = ((340 - 300) / 80) x 100 = 50%
What does LEMAC represent?
LEMAC is the distance of the leading edge of the mean aerodynamic chord from the datum point, and it is used as the starting reference in the CG percentage calculation.
Frequently asked questions about LEMAC
How is the CG percentage calculated?
It is calculated with the formula CG % MAC = ((CG position - LEMAC) / MAC length) x 100. The CG position and LEMAC must be measured from the same datum; otherwise the result will be wrong.
Where is the LEMAC value found?
LEMAC is specific to the aircraft type and is published in approved documents such as the Weight and Balance Manual. The pilot is not expected to estimate this value.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 20 Nov 2026 · Report an error: [email protected]