BLDA

Balked Landing Distance Available

PPLATPL Performances
IN SHORT

BLDA is the runway length required for an aircraft to take off when a landing is unsuccessful and a go-around is carried out.

Qu'est-ce que le BLDA ?

Balked Landing Distance Available (BLDA) is the minimum runway length published in an aerodrome's AIP that an aircraft needs to take off safely when a go-around must be made because of an engine failure during landing, an air traffic control instruction, or the pilot's decision.

BLDA is defined in a similar way to TORA (Take-off Run Available) but is specific to the go-around scenario. Before landing, the pilot checks the BLDA in performance calculations to confirm that the aircraft can take off safely even if the landing is unsuccessful. This is especially critical on short runways, with heavy aircraft, or in adverse weather conditions.

The BLDA value is published in the aerodrome's AIP together with other runway distances such as TORA, ASDA, TODA and LDA. During flight planning, the pilot uses the AFM (Aircraft Flight Manual) performance tables to calculate the BLDA required by their own aircraft and compares it with the available BLDA. If the required BLDA is greater than the available BLDA, the landing must not be made at that aerodrome.

Exemple

Example: A Boeing 737 operator plans to land at an aerodrome with a 2500 m runway. According to the AFM, a go-around under that day's weather conditions requires 2200 m of BLDA. Since the BLDA published in the AIP is 2400 m, the landing may be made. However, had the BLDA been 2100 m, the landing should not have been made.

Souvent confondu avec

Distance typeObjetScénario
TORADécollageDécollage normal
BLDAGo-around take-offAtterrissage non réussi
LDAAtterrissageAtterrissage normal
ASDADécollage (obstacle)Panne moteur au décollage
TEST YOURSELF

A pilot wants to carry out performance calculations because air traffic control has instructed a go-around during the approach. Which runway distance should they check?

Frequently asked questions about BLDA

What is the difference between BLDA and TORA?

BLDA is a runway distance specific to the go-around scenario. It is defined in a similar way to TORA but is determined by the go-around situation.

What should be done if the required BLDA is greater than the available BLDA?

If the required BLDA is greater than the available BLDA, the landing must not be made at that aerodrome. The comparison is made during flight planning using the AFM performance tables.

Where can the BLDA value be found?

The BLDA value is published in the relevant country's AIP together with TORA, ASDA, TODA and LDA. The current AIP must always be checked for the value.

Traduit automatiquement (IA) à partir de notre Turkish glossary entry utilisant la terminologie OACI/EASA. Mis à jour le 20 nov. 2026 · Signaler une erreur : [email protected]