Holding Coach
ATC gives the clearance, and you choose the entry type. In training mode, learn each answer with the diagram; in the challenge, collect the highest score over 10 questions.
Your scores are stored only in this browser. Clearance texts are in English; in Türkiye, IFR radio communications are conducted in English.
Find the Entry Type in 5 Steps
You have no time to draw in the cockpit. With this method you find the entry type in a few seconds, simply by looking at the heading indicator.
- Find the inbound courseIf clearance gives a radial, inbound course = radial + 180 (040 radial → inbound 220°). For NDB or fix holds, the inbound course is stated directly.
- Note the turn direction"Right turns" is standard (right), "left turns" is non-standard (left). If not stated, right turns are assumed.
- Calculate the differenceA = aircraft heading − inbound course (bring it within 0–360). For a left-turn hold, use 360 − A.
- Select sectorTeardrop for 110°–180°, parallel for 180°–290°, and direct entry for the rest (290°–110°). If you are within 5° of a sector boundary, both are acceptable.
- Set speed and timeAt 14 000 ft and below, a maximum of 230 kt and a 1-minute leg; above it, 1.5 minutes. Slow down before reaching the fix.
Límites de velocidad y tiempo
Holding speed is adjusted before reaching the fix. These values are ICAO standards; if the national AIP or the chart states a different limit, that one applies.
| Altitud | Velocidad máx. | Leg |
|---|---|---|
| 14 000 ft e inferior | 230 kt | 1 min |
| 14 000 – 20 000 ft | 240 kt | 1.5 min |
| 20 000 – 34 000 ft | 265 kt | 1.5 min |
| Por encima de 34 000 ft | M0.83 | 1.5 min |
For category A/B aircraft below 14 000 ft, 170 kt. Turns are made at 25° bank or 3°/s (standard rate turn), whichever requires less bank.
Preguntas frecuentes
How Do You Choose the Holding Entry Type?
The difference between the inbound course and the aircraft's heading on arrival at the fix is examined. For a right-turn hold, if the difference (heading − inbound course) is 110°–180°, it is a teardrop; 180°–290° is parallel; in other cases, a direct entry is made. For a left-turn hold, the sectors are mirror images.
What Are the Holding Speed Limits?
According to ICAO PANS-OPS, 230 kt at 14 000 ft and below, 240 kt between 14 000–20 000 ft, 265 kt between 20 000–34 000 ft, and Mach 0.83 above 34 000 ft. For category A and B aircraft, 170 kt below 14 000 ft. In turbulence, a higher speed may be used with ATC approval. US (FAA) limits differ.
How Many Minutes Is the Holding Leg?
At 14 000 ft and below, the inbound leg is 1 minute; above it, 1.5 minutes. In wind, the outbound time is adjusted so the inbound leg keeps the correct time. For holds given with DME, the leg is limited by distance instead of time.
What Is the Difference Between Teardrop and Parallel Entry?
For a teardrop entry, after passing the fix, fly outbound and turn 30° towards the holding side for 1 minute, then turn in the holding direction to intercept the inbound course. For a parallel entry, after passing the fix, fly parallel to the outbound course on the side opposite the holding, then turn towards the holding side to intercept the inbound course or the fix.
What Does Holding on a Radial Mean?
In a clearance such as "Hold northeast of XXV on the 040 radial", the holding pattern lies on the 040 radial of the VOR, and the aircraft flies towards the VOR to complete the inbound leg. Therefore the inbound course is the reciprocal of the radial: 040 + 180 = 220°.